Eaton Launches New Metal 3D Printing Program to Reduce Development Time, Improve Efficiency
21.10.2020 17:00:00 EEST | Business Wire | Press release
Power management company Eaton today announced its Vehicle Group is implementing a new 3D metal printing program as a part of its Industry 4.0 strategy to reduce development time and improve efficiency. The first metal printer system was installed at the Kings Mountain, N.C., facility, and a global deployment of 3D polymer printing technology is slated to be completed by first-quarter 2021.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20201021005571/en/
Eaton’s Vehicle Group reduced cost and development time using its 3D metal printing capabilities to produce this oil fill nozzle. (Photo: Business Wire)
The 3D printers are being utilized to create high-quality fixtures, safety devices, automation grippers for assembly and handling, and maintenance components requiring replacement. Prototype development is following the same strategy to support faster product development trials and improve efficiency.
Improving output and efficiency
To speed up the design process, scanners are used to create 3D models of existing components. This process allows components to be reverse-engineered to better leverage 3D printing capabilities, including changing component design to use less material, the addition of different topography elements or consolidating multiple components into a single part.
As an increasing number of 3D printers are deployed across the globe, Eaton’s Vehicle Group has been realizing further operational improvements including lead-time reduction and cost savings.
The 3D printing technology adds material only where it is needed and allows more advanced designs to be developed. Together, these two factors reduce the amount of post-processing operations needed while reducing material cost.
A closer look at 3D printing
The process to print metal parts and components begins with powdered metal stored in a rod and held together by wax and a polymer binder. Similar to extrusion, the metal is melted, and the 3D printer begins to add layer after layer, based on its programmed schematics.
Once the printing process is complete, the part or component is run through a chemical bath to remove most of the polymer binder. The part then goes through a furnace to remove the remaining wax and polymer, and to fuse the metal material in a high-density structure. Depending on what the printed part or component is to be used for and which material it was printed with, an additional heat treatment process can be performed to increase part strength even further.
The total lead time to get a component printed depends on several criteria, including the size and intricacy of the part. Depending on the part or component design and required tolerances, it also can undergo post-processing. The debinding operation and heat treatment are done in batches, with several different components going through these processes together while the next components are being printed. Although the printer, debinding and furnace work in an integrated loop, there is flexibility to increase the number of printers without having to duplicate either the debinding or furnace.
Going forward, the Vehicle Group’s 3D printing capabilities will be used to further reduce production time and drive efficiency. Learn more about the Vehicle Group’s Industry 4.0 technologies and benefits.
Eaton’s mission is to improve the quality of life and the environment through the use of power management technologies and services. We provide sustainable solutions that help our customers effectively manage electrical, hydraulic, and mechanical power – more safely, more efficiently, and more reliably. Eaton’s 2019 revenues were $21.4 billion, and we sell products to customers in more than 175 countries. We have approximately 92,000 employees. For more information, visit www.eaton.com.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20201021005571/en/
Contact information
Thomas Nellenbach
thomasjnellenbach@eaton.com
(216) 333-2876 (cell)
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Galderma Provides Progress Update Regarding RelabotulinumtoxinA Regulatory Submission in the United States1.7.2026 08:00:00 EEST | Press release
Galderma (SIX: GALD) today provided progress updates regarding the regulatory review of its pending Biologics License Application (“BLA”) for RelabotulinumtoxinA with the U.S. Food and Drug Administration (“FDA”). The Company has received a Complete Response Letter (CRL) from the FDA with comments related to observations during manufacturing site inspection and analytical method optimization. As part of its review, the FDA conducted a Pre-License Inspection (PLI) of Galderma’s manufacturing site. All other aspects of the BLA, including safety- and efficacy-related parts, did not solicit deficiencies to be addressed. The FDA made observations during the PLI for which Galderma is putting in place corrective and preventive actions. Galderma will also be seeking further guidance through continued open dialogue with the FDA toward resolution of the relevant observations. Galderma plans to rapidly respond to the CRL and advancing RelabotulinumtoxinA in the U.S. remains a top priority. The ob
EVE Energy Showcases All-Scenario Energy Storage Solutions at The Smarter E Europe 20261.7.2026 04:45:00 EEST | Press release
EVE Energy unveiled its Mr. Big Family series, a 6.9+ MWh energy storage system, and all-scenario energy storage solutions at Intersolar Europe in Munich. Drawing on traceable large-cell technology, proven large-scale energy storage project delivery experience, and global delivery capabilities, the company is addressing Europe's diverse energy storage requirements across utility-scale, commercial & industrial (C&I ), and data center segments. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260630889717/en/ EVE Energy showcases its Mr. Giant 3.0 6.9+ MWh energy storage system at The Smarter E Europe 2026 in Munich, Germany Advancing Large-Cell Technology with Global Project Validation As one of the first companies to focus on large-capacity energy storage cells, EVE Energy has iteratively upgraded its cell platform from 560 Ah and 628 Ah to 702 Ah, adhering to a stacking process route throughout. At the exhibition, the Mr. Gia
Bending Spoons S.p.A. announces pricing of initial public offering1.7.2026 02:56:00 EEST | Press release
Bending Spoons S.p.A. (“Bending Spoons”), a leading technology company, today announces the pricing of its initial public offering (“IPO”) at $29.00 per share. A total of 57,971,015 ordinary shares are being offered, of which 34,398,640 shares are being offered by Bending Spoons and 23,572,375 shares are being offered by certain selling shareholders (the “Selling Shareholders”). Bending Spoons will not receive any proceeds from any sale of shares by the Selling Shareholders. The shares are expected to begin trading on the Nasdaq Global Select Market under the ticker symbol “BSP” on July 1, 2026. The offering is expected to close on July 2, 2026, subject to customary closing conditions. In addition, Bending Spoons and the Selling Shareholders granted the underwriters an option to purchase up to an additional 5,244,026 ordinary shares from Bending Spoons and up to an additional 3,451,626 ordinary shares from the Selling Shareholders at the initial public offering price, less underwriting
FDA Issues Modified Risk Tobacco Product Orders for 20 ZYN Nicotine Pouch Products30.6.2026 19:19:00 EEST | Press release
Philip Morris International Inc. (PMI) (NYSE: PM) today announced that the U.S. Food and Drug Administration (FDA) issued Modified Risk Tobacco Product (MRTP) orders for 20 variants of ZYN nicotine pouch products. These are the first MRTP orders granted for nicotine pouches, allowing PMI U.S. to market the following claim for the authorized ZYN products: “Using ZYN instead of cigarettes puts you at a lower risk of mouth cancer, heart disease, lung cancer, stroke, emphysema, and chronic bronchitis.” “FDA’s decision is an important moment for the more than 45 million legal-age nicotine consumers in America,” saidStacey Kennedy, PMI U.S. CEO. “Today’s news ensures these adultshave access to accurate, science-based information, including FDA-authorized evidence that switching from cigarettes to ZYN reduces the risk of smoking-related diseases like heart disease and lung cancer,” she added. “More broadly, it reinforces the agency’s science-based approach to evaluating products across the co
Caidya Announces Strategic Combination with Simbec-Orion Bridging Early Scientific Insight and Global Clinical Execution30.6.2026 18:00:00 EEST | Press release
Caidya today announced a strategic combination with Simbec-Orion designed to close the divide between early scientific insight and global clinical execution. The combination of Caidya and Simbec-Orion creates a differentiated specialty clinical CRO platform that enables programs to scale, maintaining focus, speed, and accountability. The strategic combination brings together complementary strengths to create a more complete development partner for innovative biopharma companies. With established operations across Europe, the Americas, APAC, and China, the combined organization provides meaningful expertise and execution capabilities in the regions that matter most. Simbec-Orion brings early-phase clinical pharmacology capabilities alongside deep therapeutic expertise for later stage complex oncology and rare disease trials, helping sponsors shape critical decisions early in the development lifecycle. Together, the organizations strengthen their ability to support complex, cross-border
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom