Montrose Environmental Group Leadership, 3M Chief Technology Officer Discuss Successful Advancements for Removal of “Forever Chemicals” from Water
Montrose Environmental Group, Inc. (“Montrose”) (NYSE: MEG) today shared highlights from its presentation with 3M Company at the Bank of America 31st Annual Transportation, Airlines and Industrials Conference in New York. Montrose President and Chief Executive Officer, Vijay Manthripragada, and Montrose Chief Innovation Officer, Steve Woodard, Ph.D., joined 3M’s Chief Technology Officer John Banovetz, Ph.D., for a panel titled, “PFAS Panel: Advancing Technology for a Cleaner Tomorrow.”
During the panel, Montrose and 3M discussed how both companies are innovating to remove PFAS compounds from complex water sources at 3M’s chemical manufacturing sites at an unprecedented scale, and the intersection of sustainability including through the use of Montrose’s proprietary ion exchange technology.
“Our company is based on innovation and science, and therefore we’re looking for partners in the same vein,” said 3M’s Dr. Banovetz. “We were quickly able to find a partner in Montrose and have been very thankful for their partnership and helping us achieve our sustainability goals, particularly, our water quality goal.”
“We work with many Fortune 500 companies. John and the 3M leadership team are among the most sustainability-oriented leaders we’ve had the pleasure of working with,” said Mr. Manthripragada. “When the Montrose and 3M teams were thinking about how to [remove PFAS from water], sustainability mattered. The byproduct of that [collaborative] innovation and technology development is a solution that delivers a lot less waste, uses a lot less filtration media, has a smaller footprint which is arguably safer for workers, and uses less energy.”
Montrose’s patented regenerative solution features small plastic beads with special physical properties that give them a high affinity for PFAS and the ability to remove the compounds from water. Instead of discarding and replacing the beads once used, they can be washed and reused. Further, Montrose has developed technology to clean the spent regenerative solution using distillation and super-loading, allowing for its continued reuse. Pairing the resin treatment technology with the regenerative solution, provides a sustainable PFAS treatment system that is effective in removing PFAS from the environment.
Dr. Woodard noted that the systems developed for 3M through the collaboration have also been deployed globally and are benefiting communities as far away as Australia.
“We have developed multiple technologies to remove them from the environment, and 3M is leading the way,” Woodard said. “We're going to benefit a lot of industries, communities and governments, but most importantly, the health and welfare of communities.”
A replay of the audio webcast may be accessed on the BofA conference webcast website at PFAS Panel: Advancing Technology for a Cleaner Tomorrow (veracast.com).
About Montrose
Montrose is a leading environmental solutions company focused on supporting commercial and government organizations as they deal with the challenges of today, and prepare for what’s coming tomorrow. With ~3200 employees across 100+ locations worldwide, Montrose combines deep local knowledge with an integrated approach to design, engineering, and operations, enabling Montrose to respond effectively and efficiently to the unique requirements of each project. From comprehensive air measurement and laboratory services to regulatory compliance, emergency response, permitting, engineering, and remediation, Montrose delivers innovative and practical solutions that keep its clients on top of their immediate needs – and well ahead of the strategic curve. For more information, visit www.montrose-env.com.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20240528540122/en/
Contact information
Montrose
Investor Relations:
Rodny Nacier
(949) 988-3383
ir@montrose-env.com
Media Relations:
Sarah Kaiser
(225) 955-1702
pr@montrose-env.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Murata Unveils World’s First 15nF/1.25kV C0G MLCC in 1210-inch Size2.12.2025 04:00:00 EET | Press release
Murata Manufacturing Co., Ltd. (TOKYO: 6981) (ISIN: JP3914400001) announces the launch and mass production of its multilayer ceramic capacitor (MLCC) featuring a capacitance of 15nF, a rated voltage of 1.25kV, and C0G characteristics in the compact 1210-inch (3.2mm x 2.5mm) size. This product delivers highly efficient power conversion and stable performance under high-voltage conditions, making it suitable for onboard chargers (OBCs) in electric vehicles (EVs) and power supply circuits in high-performance consumer devices. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20251201104421/en/ [Murata Manufacturing Co., Ltd.] 15nF/1.25kV/C0G MLCC in 1210-inch Size Resonant and snubber circuits are essential for efficient power conversion and suppressing current and voltage peaks. In both circuits, repeated exposure to high voltage and high current can cause even slight changes in component performance, leading to efficiency loss or
With 40% of Agentic AI Projects Predicted to Fail, Leading Software Developer Says Compliance Is the One Place Where Agentic AI Will Thrive2.12.2025 02:01:00 EET | Press release
The CEO of one of the world’s leading global compliance software developers, Ideagen, has today (December 2, 2025) said compliance represents the one domain where autonomous AI will succeed – despite technology insights company Gartner® warning "… over 40% of agentic AI projects will be canceled by the end of 2027”. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20251201511477/en/ Ben Dorks, Ideagen CEO Speaking at the launch of their own agentic AI platform Ideagen Mazlan, Ben Dorks said: “Autonomous AI will succeed in compliance because failure is measurable, stakes are high and outcomes are binary. “AI that continuously monitors jurisdictional or industry specific compliance frameworks, detects patterns across thousands of records, raises actions for others to follow, flags gaps before audits, autonomously? That's agentic. It will literally save lives and is the most transformative shift in protecting people, products and p
VeriSilicon’s NPU IP VIP9000NanoOi-FS has Achieved ISO 26262 ASIL B Certification2.12.2025 02:00:00 EET | Press release
VeriSilicon (688521.SH) today announced that its NPU IP VIP9000NanoOi-FS has successfully achieved ISO 26262 ASIL B certification, marking a significant milestone in the functional safety capabilities of the company’s neural network processing unit portfolio. This IP features an architecture streamlined for seamless SoC integration, delivering high-quality inference with low power consumption and a compact silicon footprint. The certificate was issued by SGS-TÜV Saar, an international testing, inspection and certification institution. As part of VeriSilicon’s VIP9000 series, the VIP9000NanoOi-FS IP is designed for automotive and edge AI applications, providing high-performance neural network processing with a safety-compliant architecture. The IP supports a wide range of AI inferencing models including Large Language Models (LLMs) and Convolutional Neural Networks (CNNs), with hardware-accelerated AI inference, enabling real-time applications such as object and scene detection, augment
UMA Launches from Europe to Shape the Global Future of Physical AI2.12.2025 00:52:00 EET | Press release
UMA (Universal Mechanical Assistant), a new robotics intelligence company founded by former leaders from Tesla, Google DeepMind, Nvidia and Hugging Face, launches today with a clear goal: to bring advanced AI into the physical world and build humanoid robots ready for real work, in real environments, at scale. UMA’s founders were instrumental in shaping the last decade of breakthroughs in deep learning, robotics and open-source AI. They are convinced that the next era of artificial intelligence won’t unfold on screens, it will happen in warehouses, hospitals, labs, factories and homes, where machines must face friction, unpredictability and human complexity. UMA is built for this transition: from digital intelligence to physical autonomy. AI Is Moving Off the Screen and into the World The past ten years gave rise to generative models, multimodal systems and language-based intelligence. The next decade will be defined by robotics, powered by an AI that can see, move, manipulate and make
FlightSafety International Appoints Eric Hinson as Chief Executive Officer2.12.2025 00:00:00 EET | Press release
FlightSafety International Inc. today announced the appointment of Eric Hinson as chief executive officer, effective immediately. Hinson will succeed former president Barbara Telek who recently announced her retirement. Hinson’s appointment marks a return to FlightSafety. He served as an executive vice president from 2009 to 2012 before leaving to be the president and CEO of Simcom International, Inc. Hinson started his aviation career as a naval aviator flying tactical aircraft in training, fleet, and operational test squadrons. Today, he is an active ATP-rated pilot with more than 5,000 total flight hours. He brings a unique operational perspective to the position—one that blends executive leadership with firsthand experience. In addition to FlightSafety and Simcom, Hinson has served in a variety of senior leadership positions at leading aviation companies, including Honeywell, Gulfstream, and Piaggio Aerospace. He also served as a board member of the General Aviation Manufacturer As
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom