4Moving Biotech announces successful results from its Lasare Phase I 4P004 Clinical Trial intraarticular Liraglutide for knee osteoarthritis patients
10.6.2024 08:30:00 EEST | Business Wire | Press release
4Moving Biotech, a spin-off of 4P-Pharma committed to developing first-in-class treatments to modify the natural course of knee osteoarthritis, announces the successful achievement of the Phase 1 Lasare trial in knee osteoarthritis (OA) patients using 4P004.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240609275171/en/
(Graphic: Business Wire)
Lasare Phase I trial is a multi-center, randomized, double-blinded, placebo-controlled involving 34 patients across three sites in Belgium.
The study evaluated the safety, tolerability, and pharmacokinetics of ascending doses of a single intra-articular injection of liraglutide (4P004).
The trial reached its primary objective, confirming that intraarticular liraglutide (4P004) was safe and well tolerated. A pharmacological active dose has been identified, with similar expected adverse events (EAEs) in the 4P004 groups as the placebo group. Pharmacokinetics, both observed and simulated Cmax values, also indicated lower systemic exposure than reported for subcutaneous liraglutide injection from the approved product, Victoza®, affirming the company’s plan to pursue a 505(b)(2) regulatory pathway in the US for 4P004.
Pr. Francis Berenbaum, Co-founder and Chief Medical Officer of 4Moving Biotech, declared: "The Success of the Phase 1 study of 4P004 underscores the quality of our advancements in the quest for therapeutic solutions for patients suffering from knee osteoarthritis. Furthermore, with the established safety and tolerability profiles, we are progressing confidently to the next stage of clinical development with 4P004."
As for ultimate goal, 4Moving Biotech’s strategy intends to secure accelerated approvals in the US and EU for early market entry at the end of the planned Phase 2b efficacy and safety trial. Toward this goal, the company recently received constructive pre-IND guidance from the FDA, translating 4Moving Biotech’s planned potential accelerated approval driven strategy into a highly differentiated clinical program catalyzed by a unique combination of reasonably likely surrogate endpoints, supported by sophisticated in silico AI-based prognostic modelling.
Revital Rattenbach, Chairwoman of 4Moving Biotech, stated: "Beyond the positive results from our phase I clinical study on knee osteoarthritis, the FDA's positive echoing has built a tremendous momentum for our accelerated strategy to the market, with hopes to bring to OA patients the first therapy being able to modify the natural course of the disease."
About 4Moving Biotech
Incorporated in mid 2020 as a spin-off of 4P-Pharma, 4Moving Biotech is a clinical stage biotechnology company dedicated to the development of the Disease-Modifying Osteoarthritis Drug (DMOAD). Its mission is to provide a sustainable therapeutic solution to the significant unmet medical need of osteoarthritis. The company is headquartered at the Pasteur Institute in Lille, France.
Website: https://www.4movingbiotech.com/
LinkedIn: https://fr.linkedin.com/company/4moving-biotech
About Lasare
This project has received funding from the Eurostars-2 joint program with co-funding from the European Union Horizon 2020 research and innovation program. The funding agencies supporting this work are (in alphabetical order of participating countries): France: BPI France ; Germany: Project Management Agency (DLR), which acts on behalf of the Federal Ministry of Education and Research (BMBF); The Netherlands: Netherlands Enterprise Agency (RVO); Switzerland: Innosuisse (the Swiss Innovation Agency).
The only version of the 4Moving Biotech press release that is legally binding is the one in its original language. Translations must always be compared to the source text, which will establish precedence. The press release text resulting from a translation should not be considered official in any way.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20240609275171/en/
Contact information
Press :
Emmanuel Dadje
Communication Manager
+33 6 30 06 12 13
emmanuel.dadje@4P-Pharma.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
PMC Organometallix Announces Price Increase on All Products25.4.2026 00:02:00 EEST | Press release
Due to significant changes in market conditions, PMC Organometallix, Inc. announces that effective May 1, 2026, or as contracts permit, prices across all product lines globally will increase by 10-25%. This adjustment is driven by sustained cost pressures from key inputs including rising raw material costs and escalating freight and logistics expenses. While the company has been absorbing these increases, the current economic environment brought on by the geopolitical crisis of the Iran conflict requires this adjustment to continue providing the high-quality, consistent materials and supply reliability that customers expect. PMC Organometallix will implement these changes in a transparent, collaborative manner and values your partnership while navigating these economic challenges. Customers with questions or to discuss a specific situation should contact their account representative. About PMC Group PMC Group is a growth-oriented, diversified, global chemicals and plastics company deli
Frankfurt Higher Regional Court upholds BESREMi ® arbitral award in favor of AOP Health24.4.2026 19:52:00 EEST | Press release
Today, the Higher Regional Court of Frankfurt upheld the February 20251 partial final ICC arbitral award in favor of AOP Orphan Pharmaceuticals GmbH (“AOP Health”) in its dispute with PharmaEssentia Corp. (“PharmaEssentia”). The ruling confirms the award which found the Taiwanese company to be liable for certain damages. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260424005227/en/ Portrait Dr. Rudolf Widmann, Founder AOP Health Credit: AOP Health/Daniel Ospelt Dr. Rudolf Widmann, one of the two founders of AOP Health, explains: “We very much welcome the Frankfurt Higher Regional Court’s decision that confirms our position. In the interest of our patients, we are dedicated to maintaining stable and sustainable access to BESREMi® and to responsibly navigating future challenges.” The Product in Dispute The conflict centers around BESREMi® (ropeginterferon alfa-2b), a product launched in 2019 and developed by AOP Health into
Compass Pathways Announces FDA Granted NDA Rolling Review Request and Awarded Commissioner's National Priority Voucher24.4.2026 17:37:00 EEST | Press release
Compass Pathways plc (Nasdaq: CMPS), a biotechnology company dedicated to accelerating patient access to evidence-based innovation in mental health, today announced the U.S. Food and Drug Administration (FDA) granted Compass NDA rolling review request and selected COMP360, Compass’ proprietary formulation of synthetic psilocybin, for the Commissioner's National Priority Voucher (CNPV) program for treatment-resistant depression (TRD). Companies selected for the voucher program will be entitled to benefits including enhanced communications and a shortened 1-2 month review time following filing of a New Drug Application (NDA), while maintaining FDA’s rigorous safety and efficacy standards. “We are honored and grateful to be selected for the CNPV which is a clear validation of both the urgent unmet need facing millions of people living with treatment resistant depression and the innovative science of COMP360,” said Kabir Nath, Chief Executive Officer of Compass Pathways. “As the most advan
Banma Intelligence and Alipay Launch AI Cockpit Solution Powered by Alipay AI Pay, Enabling Seamless and Secure In-Car Transactions by Voice24.4.2026 17:04:00 EEST | Press release
At the 2026 Beijing International Automotive Exhibition (“Auto China 2026”), OS and AI technology company Banma Intelligence and Alipay today launched a new AI cockpit solution integrating Alipay AI Pay, enabling drivers to complete purchases by voice command directly from their vehicle. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260424618328/en/ Industry-first AI Cockpit Solution with Alipay AI Pay Unveiled “In the past two years, smart cockpits have achieved rapid advances in perception and decision-making,” said Ming Cai, Banma Intelligence Chief Product Officer. “With large models onboard, vehicles can understand user intent and make recommendations. By integrating Alipay AI Pay into our AI cockpit solution, we are removing the last friction point in the in-car smart cockpit experience - drivers simply speak to pay, no phone required.” The new AI cockpit solution initially covers two high-frequency use cases: enterta
Spatial Announces the Release 2026 1.0.1: New Enhancements Across 3D InterOp, Data Prep, Meshing, and 3D Modeling SDKs24.4.2026 16:21:00 EEST | Press release
Spatial Corp., the leading software development kit provider for design, manufacturing and engineering solutions and a subsidiary of Dassault Systèmes, today announced new enhancements across several of its product lines. These updates further strengthen Spatial’s commitment to delivering high-performance solutions that optimize interoperability, data preparation, and advanced modeling workflows. Designed to improve efficiency and robustness across CAD translation, modeling, meshing, and simulation processes, the latest updates introduce expanded format support, enhanced PMI handling, and new capabilities for complex geometry processing. 3D InterOp NX Reader Enhancement for 2D Drawings The NX reader imports 2D drawings as visualization data from NX 2412 and later versions. glTF Writer Supports Draco Compression glTF export incorporates Draco compression for meshes and point-clouds to significantly reduce output file sizes. Enhanced Support for Reading Product Manufacturing Information
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom