Business Wire

Laserfiche Global Headquarters Achieves LEED Silver Certification

23.7.2024 17:00:00 EEST | Business Wire | Press release

Share

Laserfiche — the leading SaaS provider of intelligent content management and business process automation — announced today that its Long Beach-based global headquarters has been awarded LEED Silver certification. LEED (Leadership in Energy and Environmental Design), developed by the U.S. Green Building Council (USGBC), is the most widely used green building rating system in the world and an international symbol of excellence. Laserfiche achieved LEED Silver certification for implementing practical and measurable strategies and solutions in areas including sustainable site development, energy efficiency, materials selection, and indoor environmental quality.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240723401702/en/

Laserfiche's global headquarters in Long Beach, California. (Photo: Business Wire)

The Laserfiche headquarters project integrated sustainability and environmental practices into the construction and overall design from its inception. The site, located on a corner block of Long Beach Boulevard near the 405 freeway, was once the location of eight formerly active oil wells and widely considered undevelopable. A full remediation restored the soil and groundwater environment in preparation for construction.

Reinforcing sustainable practices beyond site remediation, Laserfiche selected low-carbon and chemically transparent building materials. During construction, Laserfiche achieved an 85% construction waste diversion rate, translating to 80 tons of CO2 saved from emissions — equivalent to an energy offset of 10 single family houses for a full year.

Design and construction followed principles of biophilic design, which focuses on incorporating elements of the natural world that contribute to human health, wellness and productivity. The office optimizes energy efficiency and thermal comfort while maximizing daylight throughout, providing well-lit workspaces and access to outdoor areas, including communal patios.

“Achieving LEED status with our global headquarters demonstrates Laserfiche’s deep commitment to our employees and the wider Laserfiche community,” says Karl Chan, chief executive officer at Laserfiche. “As one of the first global technology companies to establish a headquarters in Long Beach, we’re excited to deepen our connection to the city and region. We look forward to continuing to model innovation in our product development as well as our workplace.”

“Achieving LEED certification is more than just implementing sustainable practices. It represents a commitment to making the world a better place and influencing others to do better,” said Peter Templeton, president and CEO, USGBC. "Given the extraordinary importance of climate protection and the central role buildings play in that effort, Laserfiche’s Global Headquarters is creating a path forward through their LEED certification.”

About Laserfiche

Laserfiche is the leading SaaS provider of intelligent content management and business process automation. Through powerful workflows, electronic forms, document management and analytics, the Laserfiche® platform accelerates how business gets done, enabling leaders to focus on growth across the enterprise.

Laserfiche pioneered the paperless office with enterprise content management. Today, Laserfiche’s cloud-first development approach incorporates innovations in machine learning and AI to enable organizations globally to transform into digital businesses. Customers in every industry — including government, education, financial services, healthcare and manufacturing — use Laserfiche to boost productivity, scale their business and deliver digital-first customer experiences.

Laserfiche employees are committed to the company’s vision of empowering customers and inspiring people to reimagine how technology can transform lives.

Connect with Laserfiche:
Laserfiche Blog | Twitter | LinkedIn | Facebook

About the U.S. Green Building Council (USGBC)

The U.S. Green Building Council (USGBC) is committed to transforming how buildings and communities are designed, built and operated to create thriving, healthy, equitable and resilient places that advance human and environmental wellbeing. USGBC leads market transformation through its LEED green building program, robust educational offerings, an international network of local community leaders, the annual Greenbuild International Conference & Expo, the Center for Green Schools, and advocacy in support of public policy that encourages and enables green buildings and communities.

For more information, visit usgbc.org and connect on X (formerly Twitter), Instagram, Facebook, and LinkedIn.

View source version on businesswire.com: https://www.businesswire.com/news/home/20240723401702/en/

Contacts

Linda Domingo
Director, Communications | Laserfiche
Linda.domingo@laserfiche.com
562-988-1688 ext. 234

About Business Wire

For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.

www.businesswire.com

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

PMC Organometallix Announces Price Increase on All Products25.4.2026 00:02:00 EEST | Press release

Due to significant changes in market conditions, PMC Organometallix, Inc. announces that effective May 1, 2026, or as contracts permit, prices across all product lines globally will increase by 10-25%. This adjustment is driven by sustained cost pressures from key inputs including rising raw material costs and escalating freight and logistics expenses. While the company has been absorbing these increases, the current economic environment brought on by the geopolitical crisis of the Iran conflict requires this adjustment to continue providing the high-quality, consistent materials and supply reliability that customers expect. PMC Organometallix will implement these changes in a transparent, collaborative manner and values your partnership while navigating these economic challenges. Customers with questions or to discuss a specific situation should contact their account representative. About PMC Group PMC Group is a growth-oriented, diversified, global chemicals and plastics company deli

Frankfurt Higher Regional Court upholds BESREMi ® arbitral award in favor of AOP Health24.4.2026 19:52:00 EEST | Press release

Today, the Higher Regional Court of Frankfurt upheld the February 20251 partial final ICC arbitral award in favor of AOP Orphan Pharmaceuticals GmbH (“AOP Health”) in its dispute with PharmaEssentia Corp. (“PharmaEssentia”). The ruling confirms the award which found the Taiwanese company to be liable for certain damages. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260424005227/en/ Portrait Dr. Rudolf Widmann, Founder AOP Health Credit: AOP Health/Daniel Ospelt Dr. Rudolf Widmann, one of the two founders of AOP Health, explains: “We very much welcome the Frankfurt Higher Regional Court’s decision that confirms our position. In the interest of our patients, we are dedicated to maintaining stable and sustainable access to BESREMi® and to responsibly navigating future challenges.” The Product in Dispute The conflict centers around BESREMi® (ropeginterferon alfa-2b), a product launched in 2019 and developed by AOP Health into

Compass Pathways Announces FDA Granted NDA Rolling Review Request and Awarded Commissioner's National Priority Voucher24.4.2026 17:37:00 EEST | Press release

Compass Pathways plc (Nasdaq: CMPS), a biotechnology company dedicated to accelerating patient access to evidence-based innovation in mental health, today announced the U.S. Food and Drug Administration (FDA) granted Compass NDA rolling review request and selected COMP360, Compass’ proprietary formulation of synthetic psilocybin, for the Commissioner's National Priority Voucher (CNPV) program for treatment-resistant depression (TRD). Companies selected for the voucher program will be entitled to benefits including enhanced communications and a shortened 1-2 month review time following filing of a New Drug Application (NDA), while maintaining FDA’s rigorous safety and efficacy standards. “We are honored and grateful to be selected for the CNPV which is a clear validation of both the urgent unmet need facing millions of people living with treatment resistant depression and the innovative science of COMP360,” said Kabir Nath, Chief Executive Officer of Compass Pathways. “As the most advan

Banma Intelligence and Alipay Launch AI Cockpit Solution Powered by Alipay AI Pay, Enabling Seamless and Secure In-Car Transactions by Voice24.4.2026 17:04:00 EEST | Press release

At the 2026 Beijing International Automotive Exhibition (“Auto China 2026”), OS and AI technology company Banma Intelligence and Alipay today launched a new AI cockpit solution integrating Alipay AI Pay, enabling drivers to complete purchases by voice command directly from their vehicle. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260424618328/en/ Industry-first AI Cockpit Solution with Alipay AI Pay Unveiled “In the past two years, smart cockpits have achieved rapid advances in perception and decision-making,” said Ming Cai, Banma Intelligence Chief Product Officer. “With large models onboard, vehicles can understand user intent and make recommendations. By integrating Alipay AI Pay into our AI cockpit solution, we are removing the last friction point in the in-car smart cockpit experience - drivers simply speak to pay, no phone required.” The new AI cockpit solution initially covers two high-frequency use cases: enterta

Spatial Announces the Release 2026 1.0.1: New Enhancements Across 3D InterOp, Data Prep, Meshing, and 3D Modeling SDKs24.4.2026 16:21:00 EEST | Press release

Spatial Corp., the leading software development kit provider for design, manufacturing and engineering solutions and a subsidiary of Dassault Systèmes, today announced new enhancements across several of its product lines. These updates further strengthen Spatial’s commitment to delivering high-performance solutions that optimize interoperability, data preparation, and advanced modeling workflows. Designed to improve efficiency and robustness across CAD translation, modeling, meshing, and simulation processes, the latest updates introduce expanded format support, enhanced PMI handling, and new capabilities for complex geometry processing. 3D InterOp NX Reader Enhancement for 2D Drawings The NX reader imports 2D drawings as visualization data from NX 2412 and later versions. glTF Writer Supports Draco Compression glTF export incorporates Draco compression for meshes and point-clouds to significantly reduce output file sizes. Enhanced Support for Reading Product Manufacturing Information

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye