Business Wire

Aidoptation Receives Approval for First Fully Autonomous Driving Tests on Highways in the European Union

9.7.2026 09:32:00 EEST | Business Wire | Press release

Share

Aidoptation BV, the autonomous vehicle technology company headquartered at DronePort in Sint-Truiden, has received official approval from the Federal Public Service Mobility (FOD) and Transport and the Flemish Agency for Roads and Traffic (AWV) to conduct fully autonomous driving tests on public highways. The permit covers 100 km on the E313 and E314 highways in the province of Limburg, and marks the first time a Level 4 fully autonomous driving system will be tested at highway speeds on public roads in the European Union.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260708112110/en/

Our car driving on the highway (in manual mode).

Within the global automotive industry, Level 4 is defined as autonomous driving capable of performing all driving tasks and monitoring the environment without any human intervention. This level of autonomy is distinct from the Advanced Driver Assistance Systems (ADAS) that have been tested by several automakers (OEMs) in the European Union, including Tesla FSD, which is classified as Level 2 requiring constant driver supervision; the human driver remains legally liable for the vehicle's actions. The testing will be conducted using the Maserati GranTurismo Folgore electric vehicle platform, which Aidoptation has equipped with LiDAR, radar, and camera sensors, as well as robotics hardware, to enable full autonomous driving at highway speeds.

The permit approval is a decisive step in Aidoptation’s mission to develop life-saving autonomous driving technology for the most severe category of road accidents: high-speed crashes on motorways, where at 120 km/h a vehicle covers more than 50 meters in the 1.5 seconds it takes an average driver to react. Accidents at such speeds are rare but often result in death or severe injuries, roadway closures, and loss of property and infrastructure. Safely managing obstacles and crash-avoidance maneuvers, known as “edge-cases” at highway speeds, remains a key step toward unlocking the full potential of autonomous driving technologies.

Aidoptation and EdgeDrive

Aidoptation was founded in 2025 as a commercial spin-off of the Indy Autonomous Challenge (IAC), the world’s first autonomous racing competition based in the United States. The company’s engineering team set the world autonomous speed record of 318 km/h (197.7 mph) at the Kennedy Space Center in Florida using a production Maserati MC20 with no human driver on board. Aidoptation’s first commercial product, called EdgeDrive, is a Level 4 fully autonomous driving platform built specifically for highway operation at speeds of 120 km/h and above (where speed limits allow). It provides consistent and safe autonomous driving operations when it is most beneficial, where human reaction time, vehicle stability, and low tire grip conditions can reach their limits, dramatically increasing the risk of an accident. EdgeDrive uses first-principles-based deterministic models to reliably handle safety-critical scenarios: emergency maneuvers, sudden obstacle avoidance, and high-speed hazard response. With no AI involved in decision-making, driving results are fully traceable and auditable, ensuring transparency for regulators and insurers. Adaptation will offer EdgeDrive as a separate, or integrated, proven safety module to automotive OEMs and robotaxi customers seeking to expand their ODD (Operational Design Domain) for Level 3 and Level 4 autonomous vehicles to highways.

The importance of real-world testing

Testing on public highways is a critical step in the development of safe and reliable autonomous driving systems. To prepare for and secure a permit, Aidoptation has spent a year conducting extensive real-world testing of its high-speed autonomous driving technology across a wide range of weather and driving conditions at multiple sites in Belgium, including Ford Lommel Proving Grounds, DronePort runway, Circuit of Spa-Francorchamps and Circuit Zolder. The permit to test on highways in Belgium enables Aidoptation to validate its autonomous driving technology, including EdgeDrive, in real-world traffic conditions, complementing the extensive ongoing testing at proving grounds and tracks. Testing will be conducted in a phased approach under strict operational and safety protocols agreed with the Belgian authorities, which includes a human safety driver supervising who is able to take control of the vehicle at any time while testing. The project is insured by Ethias, one of Belgium’s leading insurers, whose support underpins the safe and responsible conduct of testing on public roads.

“Being the first to test fully autonomous Level 4 technology on EU highways is a milestone moment for Aidoptation, the Belgian innovation ecosystem, and the broader autonomous driving industry. Autonomous driving has enormous potential to improve safety and mobility, but commercial adoption will depend on demonstrating safe performance in the most demanding highway scenarios. Testing on public highways will generate invaluable real-world data, validate our technology, and advance our mission of reducing fatalities and making highways safer for everyone.” – Paul Mitchell, CEO of Aidoptation

As a Belgian insurer and partner to thousands of public institutions, local authorities and emergency services, we see every day just how essential safety and mobility are to society. That is why we invest in companies such as Aidoptation. Its technology has the potential to make our roads safer and help prevent road casualties. At the same time, Aidoptation demonstrates how Belgium can develop new areas of economic strength in advanced mobility technology. In this way, we combine social impact with investment in the future of our country.” – Philippe Lallemand, CEO of Ethias

“Innovation on our roads must first and foremost contribute to greater safety and economic progress. With companies such as Aidoptation, Flanders not only possesses strong expertise and technological ingenuity, but we are also putting that knowledge into practice on the road. By enabling testing under real-world conditions, we are developing concrete solutions that can save lives while strengthening our position as a European leader in smart mobility.” – Matthias Diependaele, Minister-President of Flanders

"Autonomous driving is no longer science fiction. Around the world, we are reaching a tipping point, and Flanders should not merely follow; it should lead. We have the expertise, the companies, and the ambition to be at the forefront. The fact that Aidoptation can now conduct testing on the E313 and E314 motorways demonstrates that Flanders is a place where innovation does not remain confined to ideas, but finds its way into real-world application." Annick De Ridder, Minister for Mobility of Flanders

About Aidoptation

Aidoptation BV is a Belgian autonomous vehicle software company, founded in 2025 as a commercial spin-off of the Indy Autonomous Challenge. Based at DronePort Sint-Truiden, the company develops EdgeDrive, an autonomous driving software platform designed to make high-speed highway driving safer. Aidoptation is backed by LRM, SFPIM, Ethias Ventures, and Belfius Bank.

www.aidoptation.com

View source version on businesswire.com: https://www.businesswire.com/news/home/20260708112110/en/

Contacts

Media
info@aidoptation.com

About Business Wire

For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.

www.businesswire.com

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

NIPPON KINZOKU Accelerates Global Sales of Ultra-Thin Electrical Steel Strips "GT Series" and "ST Series" as "Fine Eco Metal" Environmentally Friendly Products9.7.2026 11:01:00 EEST | Press release

NIPPON KINZOKU CO., LTD. (Headquarters: Minato-ku, Tokyo; President: Yasushi Shimokawa; TOKYO: 5491) and its subsidiary, NIKKIN DENJI KOGYO CO., LTD. (Headquarters: Kawaguchi, Saitama; President: Akira Nishimura), are launching a strategic sales initiative for their ultra-thin Grain-Oriented (GT Series) and Non-Oriented (ST Series) electrical steel strips under the brand name "Fine Eco Metal". This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260709899733/en/ By reducing the thickness of the electrical steel strip, eddy current loss (core loss) can be significantly lowered. Eddy currents are electrical currents generated within the electrical steel strip by alternating magnetic fields; they are a primary factor that increases core loss. "Fine Eco Metal" is a brand name for our proprietary "Eco-Product" series, certified based on our own environmental standards. Background and Objectives: Addressing the "Shift to Electrification

3E Acquires Yordas Group: Expanding Leadership in Product Compliance by Augmenting 3E’s Global Regulatory Content and Expertise, and Adding REACH Registration Services9.7.2026 11:00:00 EEST | Press release

3E, the leading global provider of expert-led AI compliance solutions for chemical and workplace safety, product stewardship, and sustainable supply chains, today announced its acquisition of Yordas Group, a leading international provider of scientific consulting and regulatory content services across chemical management, product stewardship, sustainability, and regulatory compliance. Headquartered in Lancaster, UK, with operations in Germany, Canada, Türkiye, and Japan, Yordas serves global brands through its Scientific Services, Regulatory Intelligence, Product Compliance, and Hazard Communication offerings. Solidifying 3E’s Global Regulatory Content Leadership and Breadth of Expertise The acquisition extends 3E's regulatory content leadership and joins two organizations that pride themselves on building and aligning the industry’s top talent of advanced regulatory and chemical experts. It further solidifies 3E as the product compliance solution provider with the industry's broadest

ROYC and PwC Sweden Collaborate to Digitalize Private Equity Structuring & Fund Operations9.7.2026 11:00:00 EEST | Press release

ROYC today announces a strategic collaboration with PwC Sweden to accelerate the digitalization of the GP value chain. The partnership brings together PwC Sweden's market-leading expertise in fund formation and structuring with ROYC’s platform capabilities, with the shared aim of compressing time-to-market, eliminating manual friction in early-phase workflows, and improving the client experience across the full fund lifecycle for fund managers operating across any jurisdiction. "Digitalization of fund operations is overdue. We work alongside fund managers on structuring decisions, regulatory requirements, and operational complexity every day, and the inefficiencies in the early phase are real and costly. What excites me about this collaboration is the practical ambition behind it: taking the knowledge we apply manually today and making it available through a platform that GPs can use from day one. Working directly with the ROYC team in Stockholm makes iteration fast, and the applicatio

Hytera Introduces PDC580 Dual-Mode Rugged Radio to Support Seamless Communication Across Critical Operations9.7.2026 10:25:00 EEST | Press release

Hytera, a leading global provider of critical communications technologies and solutions, announced the launch of the PDC580 Dual-Mode Rugged Radio, developed for organizations that continue to rely on PMR while expanding broadband communications across increasingly distributed operations. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260708879078/en/ Built to connect LTE and PMR, the Hytera PDC580 brings dual-mode communication into one compact rugged radio. “The transition from narrowband to broadband is not an overnight replacement,” said Arthur Luo, Product Manager of Hytera Smart Terminal BU. “Many organizations will operate mixed communication environments for years to come. The PDC580 is designed to make that transition seamless, allowing teams to stay connected without changing established operational workflows.” Many frontline operations involve personnel working across different locations, departments, and network

LR Invests Over €2 Million in Quality and Growth9.7.2026 10:00:00 EEST | Press release

Global demand for innovative health products continues to grow, and with it the requirements for quality, supply reliability and production capacity. LR Health & Beauty is therefore strengthening its Ahlen headquarters with an investment of more than €2 million, laying the foundation for further growth. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260709000261/en/ New, state-of-the-art production line in Ahlen, Germany, manufacturing LR 5in1 Beauty Elixir and LR 5in1 Men's Shot. At the heart of the investment is a new, state-of-the-art production line. LR will use it to fully consolidate the manufacturing of its successful 5-in-1 products at its Ahlen headquarters. This includes, among others, the LR 5in1 Beauty Elixir and the LR 5in1 Men’s Shot. At the same time, the new facility creates the conditions for future product innovations in modern nutritional supplement concepts. By bringing the complete production of its 5-in

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye