Additive Manufacturer Green Trade Association Commissions Its First Life-Cycle Assessment Research Project
13.9.2021 15:59:00 EEST | Business Wire | Press release
The Additive Manufacturer Green Trade Association (AMGTA), a global trade group created to promote the green benefits of additive manufacturing (AM), announced today at RAPID + TCT 2021 that it had selected the Golisano Institute for Sustainability (GIS) at Rochester Institute of Technology to conduct a life-cycle assessment (LCA) comparing an additively designed and manufactured aerospace component to a traditionally manufactured component. The study, which will be ISO 14040 compliant, will compare the cradle-to-grave environmental impacts of a jet engine low pressure turbine (LPT) bracket produced through traditional manufacturing methods with one that is produced via AM.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210913005524/en/
Photo courtesy of Sintavia
“This new study will include up to 18 different environmental indicators to quantify the environmental impacts that an optimized jet engine LPT bracket has throughout its entire life cycle—from material extraction, manufacturing, transportation, use, and its eventual end-of-life,” said Sherry Handel, AMGTA’s Executive Director. Ms. Handel added, “This data will then be compared to a traditionally designed and manufactured LPT bracket to determine where exactly powder bed fusion AM technology results in lower environmental impacts.” Through robust and independent research studies, the AMGTA will continue to publish research reports that advance environmental sustainability within the additive manufacturing industry.
The LCA report will be peer reviewed by a panel of three LCA experts to ensure methodology, data, assumptions, results, and conclusions are accurate. The report is expected to be published in the spring of 2022 and the key findings will be announced at RAPID + TCT in May 2022.
About AMGTA. The AMGTA was launched in November 2019 to promote the environmental benefits of additive manufacturing (AM) over traditional methods of manufacturing. The AMGTA is a non-commercial, unaffiliated organization open to any additive manufacturer or industry stakeholder that meets certain criteria relating to sustainability of production or process.
About GIS. GIS is a leading sustainability research and education organization at Rochester Institute of Technology. GIS is made up of a diverse set of academic programs and applied research centers focused on the optimization of industrial systems to maximize material and energy efficiency while minimizing adverse environmental impacts
For more information, visit www.amgta.org.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20210913005524/en/
Contact information
Sherry Handel
+1 954.308.0888
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
ADNEC Group Kickstarts November with Two of the World’s Largest Events in the Energy and Tourism Sectors31.10.2026 05:53:00 EET | Press release
ADNEC Group, a Modon company, begins November by hosting two of the world’s most significant international events in the same week. ADIPEC 2026, the world’s largest energy event, takes place at ADNEC Centre Abu Dhabi from 2 to 5 November. Meanwhile, World Travel Market (WTM) London, one of the global travel industry’s leading gatherings, takes place at the Group’s Excel London venue from 3 to 5 November. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261030918463/en/ ADNEC Centre Abu Dhabi (Photo: AETOSWire) The two events, held simultaneously at the Group’s largest venues in the UAE and the UK, reflect ADNEC Group’s capability to deliver large-scale international events across multiple markets. ADIPEC has grown alongside the venue since it was first held at the ADNEC Centre Abu Dhabi in 2006. This year’s edition is set to be the largest in the event’s history, occupying the venue’s entire 153,000 square metres of exhibition
SES and Air Astana Introduce Multi-orbit Inflight Connectivity on A321LR Fleet30.10.2026 19:35:00 EET | Press release
SES was selected by Air Astana, the award-winning flag carrier of Kazakhstan, to introduce next-generation inflight connectivity services across its Airbus A321LR fleet. The first connected aircraft entered commercial service on 29 October 2026. Fleet-wide deployment will continue across the remaining A321LR fleet. Equipped with SES’s new electronically steered array (ESA) antenna, the aircraft delivers reliable connectivity over the SES multi-orbit network. SES will provide a fully managed inflight connectivity service across the fleet, enabling Air Astana passengers to enjoy a seamless online experience throughout their journey. “Airlines are increasingly looking for connectivity solutions that deliver a seamless passenger experience while providing the flexibility to evolve with changing customer expectations,” said Blane Boynton, Senior Vice President, Aviation at SES. “SES's multi-orbit solution will enable Air Astana to offer a consistent, high-quality online experience across it
CIRCOR to Expand Industrial Portfolio with Acquisition of Green Silence Group S.p.A.30.10.2026 18:06:00 EET | Press release
CIRCOR, a KKR portfolio company and global manufacturer of flow control products for industrial and naval markets, today announced that it has signed a definitive agreement to acquire Green Silence Group S.p.A., an Italian provider of hydraulic pumps, electric motors and advanced engineering solutions. The acquisition will bring together the complementary capabilities of Settima, Motive and Spin expanding CIRCOR’s Industrial portfolio with three-screw and ultra-low-noise hydraulic pumps, Motive electric motors, high-efficiency rare-earth-free motor technologies, power electronics and advanced engineering capabilities. Together, these technologies will broaden CIRCOR’s ability to deliver integrated solutions that improve system efficiency, reduce energy consumption and critical raw materials dependency, and address evolving customer needs across industrial and mobile applications. The combination will also provide Green Silence Group access to CIRCOR’s global commercial and operational
Quectel Sues Telit, Alleging False Statements, Cybersquatting and Unfair Competition30.10.2026 17:41:00 EET | Press release
Quectel Wireless Solutions, a global end-to-end IoT solutions provider, today announced that it has filed legal action in the United States District Court for the Southern District of Florida against Telit IoT Solutions Inc. The lawsuit seeks to bring an end to Telit’s campaign of false and misleading claims about Quectel and its products. Quectel alleges that, rather than competing on the strength of its products and technology, Telit engaged in a coordinated campaign to undermine Quectel’s reputation by exploiting geopolitical concerns surrounding Chinese technology companies. According to the complaint, Telit funded, promoted, and amplified false and misleading claims about Quectel’s products while positioning itself to customers as a safer “Western” alternative. The lawsuit further alleges that Telit engaged in cybersquatting involving Quectel’s U.S. domain name to advance its campaign. Quectel maintains that these alleged actions have caused substantial harm to its sales, customer
TestMu AI Launches Kane CLI Exploration, an AI Agent That Maps an Entire Web App From a Single URL and Turns It Into Tests30.10.2026 16:00:00 EET | Press release
TestMu AI, the Full Stack Agentic AI Quality Engineering platform, announced Kane CLI Exploration, an autonomous agent that learns a web application before anyone writes a test. Given a single URL, it walks the entire app on its own, flags problems along the way and gives Kane CLI the context it needs to generate and run tests, even when no requirements, user stories or acceptance criteria exist. Every test plan starts from something written down, and many apps never had it. Legacy products lose their specs when the people who wrote them move on, and apps a coding agent built in a week often have no record of intended behavior beyond the prompt history. With nothing to test against, a testing agent ends up grading the app against itself. Starting from the URL a developer provides, the exploration agent moves through every page, junction and flow it can reach, the way a new QA engineer clicks through a product in their first week. For each page it records the controls, the flows in and
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom