Brigade-M3 European Acquisition Corp. Timing of publication of 2021 Annual Report
30.4.2022 04:32:00 EEST | Business Wire | Press release
Brigade-M3 European Acquisition Corp. (the “Company”), a special purpose acquisition company that was incorporated on 21 April 2021 under the laws of the Cayman Islands as an exempted company with limited liability and is listed on Euronext Amsterdam, announces that the Company's Annual Report for the period from its incorporation to 31 December 2021 (“Annual Report”), which was due by 30 April 2022, will be subject to a short delay due to the fact that the audit of the annual accounts by the Company’s auditor, KPMG, will not be completed in time.
The Board of Directors of the Company has not been made aware of any material audit matters which remain outstanding.
The Annual Report will be published as soon as practically possible following the conclusion of the audit process.
IMPORTANT INFORMATION
This press release contains information that qualifies as inside information within the meaning of Article 7(1) of the EU Market Abuse Regulation.
DISCLAIMER
This announcement is not for distribution or release, directly or indirectly, and should not be distributed in or sent into, the United States, Australia, Canada, Japan, Cayman Islands or South Africa or any other jurisdiction in which such distribution or release would be unlawful or would require registration or other measures. This announcement does not contain or constitute an offer of securities for sale or an invitation or offer to the public or form of application to subscribe for securities.
The release, publication or distribution of this announcement in certain jurisdictions may be restricted by law and therefore persons in such jurisdictions into which they are released, published or distributed, should inform themselves about, and observe, such restrictions. No action has been taken by the Company that would permit an offer of securities or the possession or distribution of this announcement or any other offering or publicity material relating to such securities in any jurisdiction where action for that purpose is required.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20220429005775/en/
Contact information
ENQUIRIES
Brigade-M3 European Acquisition Corp.
c/o Brigade Capital Management, LP
399 Park Avenue, 16th Floor
New York, NY 10022
Email: BrigadeM3EAC@brigadecapital.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Quectel Expands 5G Antenna Portfolio With Ten Versatile Combo Solutions, From Compact 2-In-1 to Rugged 9-In-1 Designs11.11.2026 11:00:00 EET | Press release
Quectel Wireless Solutions, a global IoT solutions provider, today announces ten external combo antennas that combine 5G with GNSS, Wi-Fi or both in a single housing. Instead of specifying, fitting and testing a separate antenna for each radio, device makers can choose one unit matched to the size, technology mix and operating environment of their deployment. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261111461614/en/ Quectel expands 5G antenna portfolio with ten versatile combo solutions, from compact 2-in-1 to rugged 9-in-1 designs Across the family, each antenna combines multiple omnidirectional elements with high isolation between them to limit self-interference. Most models cover 5G from 600MHz to 6000MHz and remain backward compatible with 4G, 3G, 2G, LTE Cat-M and NB-IoT networks. All support screw mounting, some also adhesive mounting, and housings are built for outdoor use with ratings from IP65 up to IP69K. “Ev
Quectel SP900BF-AP Smart Module Sets the Pace for Edge AI with 100 TOPS of Computing Power11.11.2026 11:00:00 EET | Press release
Quectel Wireless Solutions, a global end-to-end IoT solutions provider, today announced the SP900BF-AP, a smart module that lets robots, inspection systems and edge gateways run large AI models on the device itself. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261111252890/en/ Quectel SP900BF-AP smart module sets the pace for Edge AI with 100 TOPS of computing power Built on the Qualcomm Dragonwing™ IQ-9075 Processor and delivering up to 100 TOPS of on-device AI compute, the module enables industrial OEMs to integrate advanced AI directly into their products, reducing latency, bandwidth costs and data privacy risks associated with cloud-based processing. By processing data locally, manufacturers can support real-time robotics, automated inspection and other demanding industrial applications while retaining greater control over sensitive production data. Long-term hardware availability also helps meet the extended product l
Lattice and NXP Deliver Flexible, Secure Computing Solution for the Industrial Edge10.11.2026 23:00:00 EET | Press release
Lattice Semiconductor (NASDAQ: LSCC), the low power programmable and platform firmware leader, today announced the Lattice NXP PCIe® Companion solution, jointly enabled and promoted with NXP® Semiconductors. Pairing NXP’s i.MX 95 applications processor with Lattice Nexus™-based FPGAs over PCIe, the solution addresses the real-time connectivity, deterministic I/O, and security challenges in industrial automation, robotics, and intelligent edge applications. The joint solution is available in Lattice CertusPro™-NX or Lattice Certus™-NX configurations as companion chips to NXP i.MX 95 SoC compute processors, deepening a long-standing collaboration between Lattice and NXP spanning industrial, data center, and networking applications. The Lattice FPGA adds low latency, deterministic I/O alongside the NXP applications processor, delivering combined capabilities across real-time processing, AI, and custom I/O to help customers modernize aging designs for new interface standards. It supports e
FDA Approves PIMJETMI ® (pimicotinib) for Patients with Tenosynovial Giant Cell Tumor10.11.2026 20:14:00 EET | Press release
Merck, a leading science and technology company, announced today that the U.S. Food and Drug Administration (FDA) has approved PIMJETMI® (pimicotinib), a once-daily oral colony stimulating factor-1 receptor (CSF-1R) inhibitor, as a systemic treatment for adults with symptomatic tenosynovial giant cell tumor (TGCT) for which surgical resection may cause worsening functional limitation or severe morbidity. “People living with TGCT have long faced difficult treatment decisions as they navigate a disease that can significantly affect their daily lives including their mobility,” said Danny Bar-Zohar, CEO Healthcare and Member of the Executive Board for the Healthcare business of Merck. “Translating scientific innovation into clinically meaningful advances for people living with rare tumors is a strategic imperative for our company, as we continue our commitment to addressing significant unmet needs. With the approval of PIMJETMI in the U.S., we strengthen our leadership position and growing
Smartsheet Integrates With Claude Sheets, Making It Easy to Start Projects in Claude and Launch Workflows Across Teams with Smartsheet10.11.2026 19:57:00 EET | Press release
Smartsheet, the AI-powered enterprise work management platform, today announced a new integration with Claude Sheets, the new spreadsheet artifact in Claude from Anthropic, now in beta. With the new Send to Smartsheet feature, people who build a tracker or plan in Claude can move it into Smartsheet in a few clicks. There they can put it to work with their team, connected to the plans, projects, people and systems their organization already runs on. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261110763156/en/ With the new Send to Smartsheet feature, people who build a tracker or plan in Claude can move it into Smartsheet in a few clicks. More and more work now begins in a conversation with Claude, and the Smartsheet MCP connector for Claude puts the entire power of the Smartsheet platform into play for users. Now with Claude Sheets, a person can think through a launch plan, a project tracker or a budget, and shape with the
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom