Buster updates cabin model range: stylish new Magnum Cabin
Buster is updating its range of cabin models. The newest addition is the Buster Magnum Cabin, a stylish, comfortable and easy to handle boat for all weather conditions that is designed for eight persons. The Magnum Cabin is a practical boat for long boating seasons that can be used right after the ice leaves in springtime all the way to the following winter.
The hull of the new model is just over 7.5 metres in length and made of aluminium, while the deck and cabin are made from reinforced plastic. Large panoramic windows and unobstructed 360-degree visibility give the interior the feel of being in an open boat except with all the comforts of a cabin.
As with open boat models in the Magnum range, the driving properties of the Magnum Cabin are confidence inspiring and sporty. The maximum speed with the larger outboard option is approximately 45 knots. At comfortable cruising speeds of 25-30 knots, fuel consumption with the Yamaha F300 outboard is approximately 1.3 l per nautical mile, depending on load. The outboard options are the Yamaha F225 and Yamaha F300.
The Magnum Cabin represents the fifth generation of Buster cabin models. The properties and requirements of the latest Yamaha electronically controlled outboards have been taken into consideration already in the design phase.
The hull construction of the Magnum Cabin is based on the hull of the Buster SuperMagnum. The length of the new model is 7.58 metres and the beam 2.55 metres. The weight of the boat without outboard is 1650 kg and the load capacity 892 kg.
The history of Buster centre-cabin models dates back to 2008, when the 6.35-metre Buster XXL AWC was launched. This model was followed by the 6.6-metre Buster XXL Cabin and the 6.9-metre Buster Cabin. In 2018, the model range was further extended with the addition of the luxury Buster Phantom Cabin with a length of almost 10 metres.
Emphasis on comfortable and stylish commuting
The design of the Magnum Cabin emphasises its use as a commuting boat. A large 350-litre stowage space is located in the bow, making it easy to use when loading the boat. Roof railings also allow light loads to be transported on the roof. A sturdy targa bar at the rear of the roof can be used for attaching various accessories, such as rod boxes, a search light or a radar.
Another large stowage space can be found inside under the right rear bench, while the left side has seats, a table and space for the optional refrigerator.
The cabin features a walk-through design, in addition to which the bow can be accessed from the stern outside along the right side of the cabin. The boat is easy to board thanks to the spacious access areas and sturdy railings at both the bow and stern. The floor surfaces both inside and out are covered in non-slip patterned aluminium sheets. Double railings facilitate access from the bow, while the wide swimming platform that extends far to the side of the outboard is easy to access from the steps in the right corner of the aft deck.
The bright cabin has seating for six, and folding benches for two are available in the sheltered aft cockpit. The cockpit can also be equipped with an optional outside steering position, making it easy to skipper the boat when alone or fishing.
The spaciousness of the cabin is emphasised by the large side windows and an openable, full-width roof hatch. The adjustable navigator’s seat makes it possible to sit facing forwards in the direction of travel or backwards towards those sitting around the table. The stylish stitching on the seats emphasises the high-quality impression of the cabin.
Ergonomics and carefully considered solutions
The layout of the controls is ergonomic, and all the solutions have been carefully considered down to the smallest detail. Standard equipment includes a 16" Buster Q smart display, and options include a Raymarine Fishfinder, automatic identification system (AIS) and Raymarine Quantum radar. The console features a dedicated place for the Yamaha Helm Master EX joystick and display. Helm Master EX enables precise and easy control of the boat in tight spaces, such as in harbours and narrow channels.
Both the skipper’s and the navigator’s consoles have been designed with practical storage space for small personal items and mobile devices. Power for charging is provided by USB ports and 12-volt power outlets built into the consoles and at the rear of the cabin.
The Magnum Cabin can be powered by either a hydraulically controlled Yamaha F225 or F300 outboard or the latest Yamaha F300 V6 outboard featuring Digital Electronic Control (DEC). DEC was previously available only on Yamaha’s flagship XTO Offshore outboards.
The DEC system also includes Digital Electric Steering (DES), which delivers extreme precision and smoothness and offers a huge advancement in boat control compared to hydraulic steering. The steering response can be adjusted easily according to the conditions and individual preference: the number of rotations from lock to lock can be adjusted from four to nine rotations. The steering response can also be adjusted automatically according to the engine speed. The automatic trim assist adjusts the outboard’s trim angle to the optimal position for the best performance and fuel economy when accelerating and cruising.
The space and maintenance requirements of the reliable electric steering system are minimal, as DES eliminates the need for traditional hydraulic hoses and pumps. It also requires less power than traditional hydraulic steering.
Wide range of options
The Buster Magnum Cabin comes with readiness for a bow thruster and heater. Positioning the heater is easy thanks to ready brackets and windshield fan tubes. Cable piping also makes it easy to retrofit equipment, for example when converting the boat for fishing.
Standard equipment includes the 16” Buster Q smart display, Navionics electronic navigation charts, hydraulic steering, LED lighting in the cockpit, a tilt steering wheel, windshield wipers, navigation lights, an offshore seat for the skipper, joystick-operated trim tabs, a Yamaha Y-COP immobiliser, a cushion set and a targa bar.
A wide range of options is also available, including Yamaha Helm Master EX with joystick, autopilot, an outside steering position, an aft canvas, an anchor winch, sonar, a fishfinder, a refrigerator kit, radar, AIS, a dual battery system, a bow thruster, a remote-control search light, a heater, a shore power system and a solar panel.
The engine options are a hydraulically controlled Yamaha F225 or F300 outboard or the latest Yamaha F300 V6 outboard featuring Digital Electronic Control (DEC). With the latter, the optional outside steering position is also fitted with electronic control. The sides of the boat can be unpainted, grey or with grey foiled sides.
The Buster Magnum Cabin is made in Ähtäri, Finland.
Buster Magnum Cabin 2022
- Length 7.58 m
- Beam 2.55 m
- Weight 1650 kg
- Max load 892 kg (passengers and cargo)
- Seating capacity 8
- Engine power range 225–300 hp
- Fuel tank 280 l
- Height from keel / waterline 3.08 m / approx. 2.5 m (loaded)
- Max speed approx. 45 knots
Johan FinnbergMarketing ManagerTel:+firstname.lastname@example.org
About Buster Boats
Buster Boats is the largest designer and manufacturer of aluminium boats in Europe. The majority of the more than 125,000 aluminium boats we have launched on the world’s waters over the past over 60 years are still in use.
Boats carrying the Buster name have been produced since 1976, but Buster’s history began with the first Kello aluminium boat manufactured in 1955.
The Buster range includes 18 boats, of which the under four-metre Buster Mini and the almost ten-metre Buster Phantom are the smallest and largest, respectively. More than half of all boats manufactured are exported.
The manufacturer of Buster boats, Inha Works Ltd, is a subsidiary of Yamaha Motor Europe. Buster Boats boat production is located in Ähtäri, Finland while the company's headquarters and R&D facilities are located in Raisio, southern Finland.
Buster Boats on Euroopan suurin alumiiniveneiden suunnittelija ja valmistaja. Maailman vesille yli 60 vuoden aikana laskemistamme yli 125 000 alumiiniveneestä suurin osa on edelleen käytössä.
Buster-nimellä veneitä on valmistettu vuodesta 1976 alkaen, mutta Busterin historia alkoi jo vuonna 1955 valmistetuista, suomalaisen alumiiniveneteollisuuden aloittaneista Kello-veneistä.
Buster-veneiden valmistaja, Inhan Tehtaat Oy Ab, on Yamaha Motor Europen tytäryhtiö. Yhtiön pääkonttori sekä tuotekehitystoiminnot sijaitsevat Raisiossa ja tuotanto Ähtärissä.
Subscribe to releases from Buster Boats
Subscribe to all the latest releases from Buster Boats by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Buster Boats
Miten moottoriveneellä ajaessa voi säästää polttoainetta?21.6.2022 08:03:03 EEST | Tiedote
Taloudellisuus on tärkeä päämäärä Buster-alumiiniveneiden suunnittelussa. Kaikkein ratkaisevin tekijä löytyy kuitenkin kaasukahvan vierestä, sillä ajotapa vaikuttaa veneen kulutukseen vielä paljon rajummin kuin autossa.
How much fuel does driving a boat consume?21.6.2022 08:03:03 EEST | Press release
Fuel economy is an important consideration in the design of Buster aluminium boats. The most decisive factor, however, is the skipper, as different driving styles affect the fuel consumption of boats even more drastically than in cars.
Hur mycket bränsle förbrukas när du kör båt?21.6.2022 08:03:02 EEST | Tiedote
Bränsleförbrukning är en viktig faktor som tas med i beräkningarna under designen och konstruktionen av Busters aluminiumbåtar. Men den mest avgörande faktorn är ändå föraren, eftersom olika körstilar påverkar bränsleförbrukningen ännu mer drastiskt i båtar än i till exempel bilar.
Hvor mye drivstoff forbrukes når du kjører båt?21.6.2022 08:03:01 EEST | pressemelding
Drivstofforbruk er en viktig faktor ved konstruksjon av Busters aluminiumsbåter. Men den mest avgjørende faktoren er likevel føreren. Ulike kjørestiler påvirker drivstofforbruket enda mer dramatisk i båter enn i for eksempel biler.
Buster oppdaterer modellutvalget med en ny stilig styrhusbåt: Ny Magnum Cabin21.1.2022 10:52:28 EET | pressemelding
Buster oppdaterer nå modellutvalget med en ny styrhusbåt. Det siste tilskuddet er Buster Magnum Cabin, en stilig, komfortabel og lettmanøvrert båt for alle værforhold. Magnum Cabin er en praktisk båt hvor opptil 8 personer kan nyte en lang båtsesong, fra isen slipper om våren til neste vinter.
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.Visit our pressroom