CONVERT Clinical Trial Data Presented at ERS Demonstrates Early Success of AeriSeal System in Patients with Advanced COPD/Emphysema
15.9.2022 20:23:00 EEST | Business Wire | Press release
Pulmonx Corporation (Nasdaq: LUNG) (“Pulmonx”), a global leader in minimally invasive treatments for severe lung disease, announces the presentation of interim results from the CONVERT Study at the 2022 European Respiratory Society (ERS) International Conference. Data on the first 40 patients in the study demonstrated that treatment with the AeriSeal System successfully converted the collateral ventilation (CV) status in 78% of patients who were subsequently treated with Zephyr Valves.
The AeriSeal System is used to close collateral air channels in a target lung lobe of a patient with severe COPD/emphysema, making the patient eligible to then undergo Bronchoscopic Lung Volume Reduction (BLVR) with Zephyr Valves. Patients whose lungs have untreated collateral ventilation (CV+) are currently ineligible for treatment with Zephyr Valves and have limited options once medical management alone does not control symptoms. Once the target lobe is converted from CV+ to CV-, patients can be treated with Zephyr Valves, which has been shown to improve lung function, quality of life, and exercise capacity for patients with severe COPD/emphysema.1
The CONVERT study uses the AeriSeal System to close collateral air flow. Once the treated lobe tests negative for collateral ventilation (CV-), Zephyr Valves are implanted to address hyperinflation of that target lobe to ease emphysema symptoms without major surgery. Successfully converted patients who received Zephyr Valves had clinically meaningful Target Lobe Volume Reduction (TLVR) with a mean reduction of greater than one (1) liter. The CONVERT trial is ongoing and full clinical outcomes of BLVR with Zephyr Valves were not reported at this time. However, results recently published from a single-center feasibility study at Macquarie University Hospital in Australia showed that the AeriSeal System successfully closed collateral air channels and allowed for successful clinical outcomes after treatment with Zephyr Valves.2 At 6 months, AeriSeal and Zephyr Valve treated CV+ patients experienced clinically meaningful improvements similar to improvements in CV- patients treated with Zephyr Valves alone.2 Improvements included:
- Lung function (FEV1 increase of 19.7%, Residual Volume decrease of 16.2%)
- Quality of life (SGRQ score decrease of 15.1 points)
- Exercise capacity (Six-Minute Walk Distance increase of 77.2 meters)
There were no serious adverse reactions experienced by patients in the Australian feasibility study; 20% of patients in the CONVERT Study experienced an inflammatory response following AeriSeal treatment - all were transient, medically managed, and resolved. The available data suggest that patients with collateral ventilation can undergo successful BLVR with Zephyr Valves following closure of the fissure gap with the AeriSeal System.
“This is very promising news for patients with advanced COPD. We know that treatment with Zephyr Valves can provide long-term improvements in lung function, breathing, and quality of life, but for patients with collateral ventilation, this minimally invasive treatment has not been available as an option,” explains Dr. Michela Bezzi, Department Head and Director Interventional Pulmonology - ASST Spedali Civili, University Hospital, Brescia, Italy. “Having a technology like the AeriSeal System to convert collateral ventilation positive patients to negative status means we can provide a treatment to patients who currently have very few options.”
“This work reflects our continued commitment to developing and testing new medical technologies to help patients with severe lung disease breathe easier and have better quality of life,” states Glen French, President and Chief Executive Officer of Pulmonx. “These early study results are encouraging and move us closer to the goal of helping severe emphysema patients who have collateral ventilation benefit from our proven Zephyr Valve treatment.”
About the CONVERT Study
CONVERT is a prospective, open-label, multi-center, single-arm study being conducted at up to 20 investigational sites. The study plans to enroll 140 subjects with severe emphysema and collateral ventilation in the target lobe. This protocol is designed to evaluate the utility of the AeriSeal System, which uses a synthetic polymer foam to occlude (close) collateral air channels in a target lung lobe and convert the target lung lobe to having little to no collateral ventilation (CV-). Patients will then undergo Bronchoscopic Lung Volume Reduction with Zephyr Endobronchial Valves. Zephyr Valves are not effective if collateral ventilation (CV+) is present but once the target lobe is converted from CV+ to CV-, patients can be treated with Zephyr Valves which has been shown to improve lung function, quality of life, and exercise capacity for patients with severe COPD/emphysema.1 See https://clinicaltrials.gov/ct2/show/NCT04559464 for more details on the CONVERT Study.
The AeriSeal System is not approved by the FDA or approved for commercial sale in the United States.
About Zephyr Valves
The Zephyr Valve is a minimally invasive treatment option for severe COPD/emphysema. Zephyr Valves are placed via bronchoscopy to block off a diseased portion of the lung to prevent air from getting trapped and reduce hyperinflation, which allows the healthier lung tissue to expand and take in more air. This results in patients being able to breathe easier, be less short of breath, and have an improvement in their quality of life.1 National and global treatment guidelines for COPD include Endobronchial Valves like Zephyr Valves with the Global Initiative for Chronic Obstructive Lung Disease (GOLD) giving valves an ‘Evidence A’ rating. More than 25,000 patients have been treated with the Zephyr Valve worldwide.
About Pulmonx Corporation
Pulmonx Corporation (NASDAQ: LUNG) is a global leader in minimally invasive treatments for severe lung disease. Pulmonx’s Zephyr® Endobronchial Valve, Chartis® Pulmonary Assessment System and StratX® Lung Analysis Platform are designed to assess and treat patients with severe emphysema/COPD who, despite medical management, are still profoundly symptomatic. Pulmonx received FDA premarket approval to commercialize the Zephyr Valve following its designation as a “breakthrough device.” The Zephyr Valve is commercially available in more than 25 countries, with over 100,000 valves used to treat more than 25,000 patients. For more information on the Zephyr Valves please visit https://uspatients.pulmonx.com/. For more information on the company, please visit www.Pulmonx.com.
Forward Looking Statements
This release contains forward‐looking statements within the meaning of Sections 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. We may, in some cases, use terms such as “look forward,” “confident,” “promises,” “predicts,” “believe,” “potential,” “anticipates,” “expects,” “plans,” “intends,” “may,” “could,” “might,” “will,” “should,” or other words that convey uncertainty of future events or outcomes to identify these forward‐looking statements and include, without limitation, statements about Pulmonx’s ability to treat a greater number of patients and deliver significant benefits to patients. Forward‐looking statements should not be read as a guarantee of future performance or results and may not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. These forward‐looking statements are based on Pulmonx’s current expectations and inherently involve significant risks and uncertainties. Actual results and the timing of events could differ materially from those anticipated in such forward‐looking statements as a result of these risks and uncertainties, which include, without limitation those related to the safety, efficacy and patient and physician adoption of the company’s products, the final results and outcomes of clinical trials and studies involving the Company’s products, the ability to obtain and maintain reimbursement codes for its products, and the company’s ability to procure and maintain required regulatory approvals for its products. These and other risks and uncertainties are described more fully in the section titled “Risk Factors” in Pulmonx’s filings with the Securities and Exchange Commission (SEC), including the Company’s Quarterly Report on Form 10-Q filed with the SEC on August 8, 2022, available at www.sec.gov. Pulmonx does not undertake any obligation to update forward‐looking statements and expressly disclaims any obligation or undertaking to release publicly any updates or revisions to any forward‐looking statements contained here/in.
Pulmonx®, Chartis®, StratX®, and Zephyr® are registered trademarks of Pulmonx Corporation.
1- Criner G et al. Am J Respir Crit Care Med. 2018; 198 (9): 1151–1164.
2- Ing AJ et al. Respirology. 2022. https://doi.org/10.1111/resp.14338.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20220904005066/en/
Contact information
Media Contact:
Meghan Oreste
617-823-1441
moreste@Pulmonx.com
Investor Contact:
Brian Johnston
Gilmartin Group
investors@pulmonx.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Murata Begins Mass Production of World’s Smallest 0201-inch Size Three-Terminal Low-ESL MLCCs30.9.2026 05:00:00 EEST | Press release
Murata Manufacturing Co., Ltd. (TOKYO: 6981) (ISIN: JP3914400001) has begun mass production of the LLD series, the world’s smallest* three-terminal low-equivalent series inductance (ESL) multilayer ceramic capacitors (MLCC). Measuring just 0201-inch size (0.6 × 0.3 mm), the new products reduce mounting area by approximately 64% compared with Murata’s previous smallest 0402-inch size (1.0 × 0.5 mm), freeing up valuable PCB space in compact devices such as smartphones and wearables. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260929596419/en/ [Murata Manufacturing Co., Ltd.] Three-Terminal Low-ESL MLCCs As smartphones and wearables incorporate increasingly powerful ICs, maintaining a stable power supply becomes more challenging. High-speed operation causes current demand to change rapidly, which can lead to fluctuations in the voltage supplied to the IC. Minimizing this instability is essential for reliable performance. Thr
Lattice to Showcase AI-Driven Low Power FPGA Innovation at FPGA Horizons Conference29.9.2026 23:00:00 EEST | Press release
Lattice Semiconductor (NASDAQ: LSCC), the low power programmable and platform firmware leader, today announced its participation in the upcoming FPGA Horizons conference, taking place on October 6 – 7, 2026 in London. As part of the conference’s technical program, Lattice will deliver a Tech Talk presentation and a hands-on workshop, and host a demo showcase focused on how its low power FPGA solutions are advancing AI at the edge. Who: Lattice Semiconductor What / When (GMT+2): Oct. 6, 2026 Demo showcase including Lattice Holoscan Sensor Bridge solution and Lattice Prompt™ AI-driven FPGA design tool Tech Talk (10:10 – 10:30 a.m.), Shaw Theater: Practical Security Fundamentals for FPGA Engineers Oct. 7, 2026 Workshop (1:30 – 4:40 p.m.), Hyde Park room Lattice Nexus™-based FPGA hands-on Lattice Prompt™ agentic AI workflow Where: FPGA Horizons Conference, Pullman London St Pancras, Euston Road, London NW1 FPGA Horizons is a UK-based conference for FPGA industry specialists. Supporting Res
NetApp and Oracle to Launch Fully Managed Cloud Storage Service for Demanding AI and Enterprise Workloads29.9.2026 20:30:00 EEST | Press release
NetApp® (NASDAQ: NTAP), the Intelligent Data Infrastructure company, and Oracle today announced a new fully managed storage service that brings enterprise-grade NetApp storage natively to Oracle Cloud Infrastructure (OCI). The service will bring NetApp ONTAP® data management capabilities natively to OCI to help organizations simplify the migration and management of critical AI and enterprise workloads in the cloud. Oracle Cloud Infrastructure NetApp Storage Service is designed to be a fully managed OCI-native storage service that brings NetApp ONTAP data management capabilities to OCI. It helps enterprises migrate, run, protect, and modernize databases, enterprise applications, virtualized environments, EDA/HPC, regulated applications, and AI data pipelines while preserving familiar storage operations. “Customers want the flexibility to move AI and enterprise workloads to the cloud without giving up operational simplicity, data management, and reliability,” said Pravjit Tiwana, Senior
NetApp to Expand Partnership with SAP to Support SAP Cloud Infrastructure29.9.2026 20:30:00 EEST | Press release
NetApp, the intelligent Data Infrastructure company, today announced its intent to expand its long-standing partnership with SAP, with plans to explore deeper cloud-native integration of NetApp capabilities into SAP Cloud Infrastructure, SAP’s Infrastructure-as-a-Service platform. The NetApp Platform supports key elements of the SAP Cloud Infrastructure storage architecture, delivering reliable, highly available and high-performance file and block storage services. The NetApp Platform also provides built-in proactive data protection capabilities and data replication to support SAP’s global availability model. “SAP and NetApp share a long-standing commitment to empower the world’s most mission-critical enterprise environments,” said Álvaro Celis, Senior Vice President, Chief Commercial, Partner and Ecosystem Officer at NetApp. “By bringing together SAP Cloud Infrastructure with the NetApp Platform, we can empower customers to build an intelligent data infrastructure that delivers the ag
NetApp Honors the International Union for Conservation of Nature with the Social Impact Award for Intelligent Data for Good29.9.2026 20:30:00 EEST | Press release
NetApp® (NASDAQ: NTAP), the Intelligent Data Infrastructure company, today announced that it awarded the International Union for Conservation of Nature (IUCN) the 2026 Social Impact Award for Intelligent Data for Good at NetApp INSIGHT 2026, NetApp's flagship global event dedicated to technological innovation, taking place in Las Vegas from September 29 to October 1. Part of NetApp’s Social Impact Awards program, this recognition honors customers and partners using NetApp technology in support of social or environmental impact initiatives. The Intelligent Data for Good category reflects NetApp’s commitment to recognizing and supporting organizations using intelligent data to improve lives and strengthen communities. IUCN is the world's largest and most diverse environmental network, bringing together governments, civil society organizations, and experts to advance conservation action worldwide. Uniquely composed of more than 1,600 government and civil society member organizations and 1
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
