ExOne Unveils the X1 Powder Grip™ to Simplify the Management of MIM Powders in the All-New InnoventPro™ Metal 3D Printer
9.11.2021 16:31:00 EET | Business Wire | Press release
The ExOne Company (Nasdaq: XONE), the global leader in industrial sand and metal 3D printers using binder jetting technology, today unveiled the X1 Powder Grip, an ergonomically friendly 2-liter powder container that’s part of an innovative powder management system for the all-new InnoventPro™ metal 3D printer.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20211109005475/en/
ExOne will unveil the X1 Powder Grip™ to simplify the management of ultra-fine MIM powders in the all-new InnoventPro™ metal 3D printer. The X1 Powder Grip is part of a comprehensive new powder management system for the InnoventPro that eliminates scooping, dumping, powder clouds, and cleanup in the binder jetting of metals. (Photo: Business Wire)
The global premier of the InnoventPro metal 3D printer featuring the X1 Powder Grip is slated for Formnext 2021, to be held Nov. 16-19 in Frankfurt, Germany. ExOne will have the system on display in Hall 12.0, D69.
The InnoventPro 3L is the world’s most advanced entry-level model for metal binder jetting — designed to take the easy-to-use features of the popular Innovent+ with patented Triple ACT advanced compaction technology and offer them with a bigger build area and the best speed and cutting-edge technology features of ExOne’s production-ready printers, such as the X1 25Pro® and X1 160Pro™.
The X1 Powder Grip is part of a comprehensive new powder management system for the InnoventPro. To load metal powder into the new machine, a user positions two easy-to-use X1 Powder Grip containers, which weigh about 20 pounds each when fully loaded with 316L stainless steel, into a powder hopper at the rear of the machine with an easy quarter-turn. After the powder release valve is opened, a conveyance system lifts the powder hopper from a loading position into the build area for recoating and printing.
The X1 Powder Grip is also designed to be seamlessly used for powder reclamation and reuse with an all-new depowdering station that pairs with the InnoventPro.
What is Binder Jet 3D Printing?
ExOne’s binder jet 3D printing transforms powdered materials – metal, sand or ceramic – into highly dense and functional precision parts at high speeds.
An industrial printhead selectively deposits a binder into a bed of powder particles creating a solid part one thin layer at a time. When printing metals, the final bound metal part must be sintered in a furnace to fuse the particles together into a solid object. ExOne now delivers high densities of greater than 97% for most metals, in line with Metal Injection Molding or gravity castings.
Binder jet 3D printing technology is viewed as a desirable and sustainable production method, largely because of its high speed, low waste and cost, as well as material flexibility.
Learn more about the InnoventPro at exone.com/innoventpro.
About ExOne
ExOne (Nasdaq: XONE) is the pioneer and global leader in binder jet 3D printing technology. Since 1995, we’ve been on a mission to deliver powerful 3D printers that solve the toughest problems and enable world-changing innovations. Our 3D printing systems quickly transform powder materials — including metals, ceramics, composites and sand — into precision parts, metalcasting molds and cores, and innovative tooling solutions. Industrial customers use our technology to save time and money, reduce waste, improve their manufacturing flexibility, and deliver designs and products that were once impossible. As home to the world’s leading team of binder jetting experts, ExOne also provides specialized 3D printing services, including on-demand production of mission-critical parts, as well as engineering and design consulting. Learn more about ExOne at www.exone.com or on Twitter at @ExOneCo. We invite you to join with us to #MakeMetalGreen™.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20211109005475/en/
Contact information
Sarah Webster
Chief Marketing Officer
724.516.2336
sarah.webster@exone.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Multi-Color Corporation Initiates Implementation of Restructuring Agreement29.1.2026 08:58:00 EET | Press release
Multi-Color Corporation (“MCC” or the “Company”), a global leader in prime label solutions, today announced that to implement the previously announced restructuring support agreement (the “RSA”), the Company has commenced its prepackaged Chapter 11 filing in the United States Bankruptcy Court for the District of New Jersey (“the Court”). MCC announced on January 27 it had entered into the RSA with holders of approximately 72% in amount of MCC’s secured first lien debt and its equity sponsor, CD&R, on the terms of a comprehensive financial restructuring. The transactions contemplated by the RSA will significantly deleverage MCC’s balance sheet, reducing its net debt load from approximately $5.9 billion to approximately $2.0 billion. The Company’s annualized cash interest will also be reduced from approximately $475 million to $140 million in 2026, a reduction of over $330 million, with long-term debt maturities extended to 2033 following consummation of the restructuring transactions. A
Takeda Reports Third-Quarter FY2025 Results: Updates Full Year Outlook to Reflect VYVANSE ® Generics Impact, OPEX Discipline and FX Tailwind; Progressing Toward Three Transformative Launches Ahead29.1.2026 08:37:00 EET | Press release
Takeda (TOKYO:4502/NYSE:TAK) today announced earnings results for the third quarter of fiscal year 2025 (nine months ended December 31, 2025). The gap between incremental Growth & Launch Products revenue and VYVANSE erosion is narrowing, and operational efficiencies drove year-on-year reductions in operating expenses, including R&D. The company raised its full-year forecasts based on cost discipline and FX tailwind, while its Revenue Management Guidance has been updated primarily due to the impact of VYVANSE generics. Takeda is positioned for long-term growth and has multiple late-stage programs with multibillion-dollar peak revenue potential. Following the positive readouts from Phase 3 studies in 2025, the company has submitted New Drug Applications (NDAs) for oveporexton and rusfertide and is on track to file an NDA for zasocitinib. Each of these programs, which Takeda expects to launch within the next 18 months, has the potential to redefine standards of care, transform patient liv
Ubitus Partners with Maizuru City, Kyoto to Launch AI Data Center Project, Advancing the Deployment of a Top-Tier AI GPU Center in Japan29.1.2026 08:00:00 EET | Press release
Ubitus K.K. (Headquarters: Shinjuku, Tokyo; Representative Director & CEO: Wesley Kuo), a global leader in cloud streaming and AI solutions, today announced that it will hold a land signing ceremony and press conference with Maizuru City, Kyoto Prefecture, on January 29, 2026. At the event, Ubitus will officially unveil its comprehensive plan to construct an AI Data Center in Maizuru City, marking the company’s transition into the physical construction phase of its initiative to build a top-tier AI GPU center in Japan. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260128944842/en/ Ubitus will launch its Maizuru City AI Data Center project on January 29, marking the first step toward building a top-tier AI GPU center in Japan. Powered by NVIDIA Blackwell GPUs and NeoCloud, the project strengthens Japan’s AI infrastructure and regional development. This land agreement represents the first major milestone following Ubitus’ sel
Galderma Unveils ‘Wake Up To Restylane’, Underscoring Restylane as the Ideal Hyaluronic Acid Treatment for Always-On Natural Beauty29.1.2026 08:00:00 EET | Press release
Galderma (SIX: GALD), the pure-play dermatology category leader, has launched ‘Wake Up To Restylane’, a global campaign that showcases Restylane as an everyday beauty ally. Aligned with the growing desire for effortless, authentic results that restore facial balance and improve skin quality, the campaign highlights Restylane’s unique ability to deliver personalized results that move naturally with expressions to help people look and feel good.1,6,12-18 This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260128829353/en/ The launch was unveiled at the IMCAS World Congress 2026 in Paris, where Galderma also presented new clinical data reinforcing Restylane’s efficacy across key facial areas such as the chin, jawline, temples, as well as the décolletage, underscoring its unique position as the only HA portfolio offering a variety of formulations for tailored outcomes.1,8-11 “What's compelling about ‘Wake Up To Restylane’ is its focu
Lattice to Showcase Advanced Edge AI Solutions at the FPGA-forum 202628.1.2026 23:00:00 EET | Press release
Lattice Semiconductor (NASDAQ: LSCC), the low power programmable leader, today announced its exhibition plan for the upcoming FPGA-forum 2026 taking place February 11 – 12, 2026 in Trondheim, Norway. As part of the event, Lattice Corporate Vice President of Software Solutions and Applications Engineering Eleena Ong will deliver a keynote presentation exploring how rapidly maturing AI technologies can turn FPGA platforms into innovation canvases for a much broader range of developers, sparking new application possibilities. Lattice will also deliver a technical presentation and host a demo showcase focused on how its low power FPGA solutions are advancing connectivity and edge AI applications. Who: Lattice Semiconductor What / When (GMT+1): Lattice Demo Showcase (Table #3), Feb 11-12 Keynote Feb. 11, 9:30 a.m. “Unlocking the Next Wave of FPGA Innovators with Generative and Agentic AI” Technical Presentation Feb. 12, 10 a.m. “Smaller. Cooler. Smarter: Lattice FPGAs’ Path to Uncompromised
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom