Business Wire

Galderma Continues Global Growth Ambition With Sculptra® (injectable poly-L-lactic Acid) Re-launch in Europe

4.3.2021 10:57:00 EET | Business Wire | Press release

Share

Galderma today announced a European re-launch of Sculptra ® (injectable poly-L-lactic acid) - a collagen stimulator - with an updated administration protocol. This means that the product is ready for use more quickly following reconstitution, with increased levels of comfort for patients. Sculptra ® can now be used immediately following a two-minute reconstitution and with the optional addition of lidocaine for patient comfort. Previously, healthcare professionals had to wait two hours following reconstitution to administer the product. Sculptra ® now has the fastest reconstitution protocol of any injectable poly-L-lactic acid (PLLA) available in Europe, representing a significant growth opportunity for Galderma.

Sculptra ® has been my go-to tool for treating skin laxity resulting from aging and collagen loss in my patients’ skin, helping restore a youthful appearance,” said Dr. Christoph Martschin, Dermatologist, Akademikliniken, Department of Dermatology, Stockholm, and a featured speaker at the Sculptra ® European re-launch virtual event. “This new reconstitution protocol for Sculptra ® represents an exciting benefit as we are able to save valuable clinic time for clinicians while improving overall procedure comfort for our patients.”

Collagen provides structure and support to the skin. With facial aging, the skin’s natural collagen supply may decrease and could lead to skin laxity, wrinkles and roughness as skin quality worsens.1,2 Sculptra ® is a collagen stimulator that may help replenish lost collagen by gradually stimulating and increasing an individual’s own natural collagen production, helping restore skin quality and firmness.2-5

The updated protocol is based on new data from physiochemical studies,6 as well as results from a randomized, evaluator-blinded, parallel-group, multi-center study (NCT03780244) evaluating the safety and effectiveness of two different dilutions of Sculptra ®. This study demonstrated that treatment immediately following a two-minute reconstitution using the higher reconstitution volume (9 mL including lidocaine) was well tolerated, caused less pain on injection and was comparable to that of the reference group (Sculptra ® 5 mL) in reducing wrinkle severity of nasolabial folds (NLF) at Week 48 (n=80). Additionally, the mean change in wrinkle assessment scale (WAS) from baseline (assessed by Blinded Evaluator) was similar in both Sculptra ® study groups across 48 weeks and investigator assessed improvement using the Global Aesthetic Improvement Scale (GAIS) was > 90% in both Sculptra ® study groups.

As part of this European re-launch and in line with the company’s intensified commitment to Sculptra ®, Galderma held a dedicated interactive, virtual event with over 1,000 healthcare professionals to provide additional training and support related to this new administration protocol. The event also facilitated best practice sharing among physicians based on their clinical experiences.

“We are delighted to bring this expanded Sculptra ® offering to healthcare professionals in Europe, and yesterday’s launch event was an exciting, well-attended re-introduction to Sculptra ® and Galderma’s larger aesthetics portfolio,” said Alexandre Brennan, Global Business Unit Head, Aesthetics. “We continue to build a unique and extensive aesthetics offering at Galderma, and are proud to re-launch Sculptra ® in Europe as the foundation of our portfolio alongside a range of complementary treatments to deliver impressive and long-lasting results for healthcare professionals and their patients.”

Sculptra ® was first approved in Europe in 1999, in the United States in 2009 and in Brazil in 2004. Sculptra ® is now available in more than 40 countries globally, and additional regulatory reviews of applications for Sculptra ® in various regions are ongoing.

About Sculptra ®
Sculptra ® works to stimulate the skin’s own collagen production and is suitable for increasing the volume of depressed areas, particularly to correct skin depressions such as skin creases, wrinkles, folds, scars and for skin aging. Sculptra ® is also suitable for large volume corrections of the signs of facial fat loss (lipoatrophy).

Sculptra ® is an injectable biostimulator containing microparticles of Poly-L-Lactic Acid (PLLA) which gradually revitalizes the skin’s structural foundation, providing natural-looking, long-term results for up to 25 months. Sculptra ® was first approved in 1999 in Europe and it is currently available in more than 40 countries globally. To learn more about Sculptra ® products, visit www.galdermaaesthetics.com

About Galderma
Galderma, the world's largest independent global dermatology company, was created in 1981 and is now present in approximately 100 countries with an extensive product portfolio of prescription medicines, aesthetic solutions and consumer care products. The company partners with healthcare professionals around the world to meet the skin health needs of people throughout their lifetime. Galderma is a leader in research and development of scientifically-defined and medically-proven solutions for the skin. For more information, please visit www.galderma.com

  1. Shuster S, Black MM, McVitie E. The influence of age and sex on skin thickness, skin collagen and density. Br J Dermatol. 1975;93:639-643.
  2. Bohnert K et al. Plast Reconstr Surg 2019;127(4):1684–92.
  3. Stein P et al. J Dermatol Sci 2015;78(1):26–33.9.
  4. Goldberg D et al. Dermatol Surg 2013;39(6):915–22.
  5. Vleggaar D et al. J Drugs Dermatol 2014;13 (4 suppl):s29–31.
  6. Baumann K et al. J Drugs Dermatol. 2020;19(12):1199-1203.

###

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

Contact information

Investor and media relations
Christian Marcoux, M.Sc.
Chief Communications Officer
christian.marcoux@galderma.com
+41 76 315 26 50

Media Contact
Lauren Starr
Head of Franchise Communications
media@galderma.com
+41 79 771 52 45

About Business Wire

For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Kioxia and Sandisk Begin Production of 10th-Generation 3D Flash Memory Products at Kitakami Plant Fab23.7.2026 13:19:00 EEST | Press release

Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation (TOKYO: 285A) and Sandisk Corporation (Nasdaq: SNDK) today announced the start of production for their 10th-generation 3D Flash memory technology at Fab2 (K2) at the Kitakami Plant in Iwate Prefecture in Japan. The milestone comes as the companies continue to drive meaningful, multi-year bit growth to address the strong demand for their innovative flash memory technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260702296115/en/ Unveiling ceremony for the K2 facility In conjunction with the start of production, the companies held an unveiling ceremony for the K2 facility. Opening in September 2025, the facility has produced the companies’ 8th-generation 3D flash memory products and will begin to scale production with the introduction of their 10th-generation products. Both generations of 3D flash memory adopt innovative CBA (CMOS directly Bonded to Array)

VeriSilicon Introduces CPP2000 Camera Post-Processing IP for Embodied Robotics and Mobile Vision Applications3.7.2026 13:02:00 EEST | Press release

VeriSilicon (688521.SH) today announced its high-performance CPP2000 Camera Post-Processing (CPP) IP, expanding the company’s Image Signal Processing (ISP) solutions with advanced post-processing capabilities. By improving image quality and visual perception in mobile imaging scenarios, CPP2000 enables more reliable vision performance in robotics, drones, and other mobile vision applications. CPP2000 integrates multiple image processing technologies and can further optimize YUV images output from image signal processors. The IP supports image and video processing at up to 8K resolution and offers multiple hardware configuration options to meet diverse requirements in Power, Performance, Area (PPA), and latency across different applications. CPP2000 leverages the combined operation of multiple image processing technologies, including motion-compensated temporal filtering, advanced spatial noise reduction, chroma adjustment and dynamic contrast improvement, and edge enhancement. Together

Messer Acquires Singapore-Based Industrial Gas Platform; Japan Corporate Advisory Institute Advises Sellers3.7.2026 12:11:00 EEST | Press release

Messer, the world’s largest privately held specialist for industrial, medical, electronic and specialty gases, has acquired WKS Group, a Singapore-based industrial gas platform with operations across Singapore and southern Malaysia. Transaction terms were not disclosed. Messer reported consolidated sales of approximately EUR 4.5 billion for its 2025 financial year. Founded in Singapore in 1977, WKS Group comprises six companies and employs approximately 195 people across Singapore and southern Malaysia. The acquisition expands Messer’s operating footprint in Southeast Asia and strengthens its access to key industrial clusters across the region. “We are pleased to have completed this transaction with Messer, whose strategic vision makes them an excellent partner for WKS Group,” said Mr. Wong Koh Hoi, shareholder of WKS Group. “We appreciate JCAI’s professionalism and dedication throughout the process, and their expertise was instrumental in achieving a successful outcome.” Japan Corpora

Access Advance Welcomes Meta Platforms, Inc. and Alibaba Group to the Video Distribution Patent Pool3.7.2026 02:00:00 EEST | Press release

Access Advance LLC today announced that Meta Platforms, Inc., one of the world's largest distributors of video content across its Facebook, Instagram, Threads, and WhatsApp services, has joined the Video Distribution Patent Pool (VDP Pool) as a Licensee. Meta also joined both the HEVC Advance and VVC Advance pools as a Licensee. Alibaba Group, whose video infrastructure spans a wide range of video-based services across e-commerce, entertainment, and digital media platforms, was also announced as a VDP Pool Licensee this week. Meta and Alibaba joining the VDP Pool further reinforces the program’s market leading position in resolving the licensing issues around the use of modern video codecs, including VP9, AV1, HEVC and VVC, across all the diverse business models of internet video streaming. "A significant U.S.-based company like Meta joining as a Licensee is a milestone moment for the content distribution business and the VDP Pool," said Peter Moller, CEO of Access Advance. "Meta reach

Kioxia Commences Sample Shipments of 10th-Generation BiCS FLASH™ Devices Delivering High Performance, High Capacity and Low Power Consumption3.7.2026 02:00:00 EEST | Press release

Kioxia Corporation, a world leader in memory solutions, today announced that it has commenced sample shipments of 1Tb (terabit) Triple-Level-Cell (TLC) memory devices utilizing its 10th-generation BiCS FLASH™ 3D flash memory technology.1 These will be primarily integrated into the company’s enterprise and data center SSDs, strengthening Kioxia’s lineup to meet the growing demand for AI storage, which requires higher performance, higher capacity, and lower power consumption. These new products will be manufactured using state-of-the-art equipment at Kioxia’s Kitakami Plant Fab2 facility in Iwate Prefecture, Japan. By leveraging innovative CMOS directly Bonded to Array (CBA) technology2 and On-Pitch Select Gate Drain (OPS) technology,3 both adopted since the 8th-generation BiCS FLASH™, the 10th-generation technology achieves a NAND interface speed of 4.8 Gb/s,4 a 33% improvement over the 8th generation. Bit density has increased by 59% by stacking 332 layers and improving lateral density

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye