Kinetic Technologies Announces New IEEE® 802.3bt-Compliant Powered Device and DC-DC Flyback Controller Solution for PoE Power Supplies

15.11.2022 09:00:00 EET | Business Wire | Press release

Power management and video/audio interface IC leader Kinetic Technologies announced today the KTA1140 IEEE 802.3bt-compliant Powered Device Interface IC and the KTB1095 synchronous flyback control IC with integrated digital isolated feedback as the latest additions to their PoE and DC-DC Converter product lines.

Fully compliant with IEEE 802.3bt, 802.3at and 802.3af standards, the KTA1140 integrates input surge protection, a PD controller with 100V, low resistance 0.1Ω hot-swap MOSFET, which fully supports input power levels up to 90W. The PD controller also includes eight-event classification, ATDET, PD Detect, over temperature protection and under voltage lockout (UVLO). The KTA1140 is also designed to provide seamless support for local supplies down to 9.5V.

The KTB1095 is a highly integrated synchronous flyback converter with internal feedback utilizing a 3000VRMS digital isolator, designed to eliminate the need for an external opto-coupler, reducing cost and size. Operating over a wide operating voltage range from 5V to 100V, the KTB1095 includes both primary and secondary side, high current MOSFET drivers and employs current-mode constant on-time control for fast transient response. Featuring an adjustable soft-start function to limit start-up in-rush current, the KTB1095 also includes input voltage UVLO, output over-voltage-protection (OVP), cycle-by-cycle current limit, short-circuit protection and thermal shutdown.

“Our goal at Kinetic is to make it as easy as possible for our customers to design their power supplies,” said Erik Ogren, Kinetic Technologies’ Senior Director of Marketing. “The KTA1140 supports Class 8, 90W designs with its ultra-low resistance hot-swap MOSFET and simplifies system designs with local voltage support. KTB1095 takes advantage of Kinetic’s Tru-Iso™ technology to deliver integrated 3000V-rms on-chip digital isolator feedback, reducing BOM count and PCB area.”

KTA1140 and KTB1095 are sampling now, with production expected to begin in the first quarter of 2023.

Visit Kinetic Technologies for further information.

Key Product Highlights:

KTA1140 – PoE 802.3bt PD Interface

Fully supports IEEE® 802.3bt
- Input Power Levels Up to 90W
- Class 0-8 for PoE PD
Compatible with IEEE® 802.3af/at
IEC 61000-4-2/3/4/5/6 requirements for EMC
Seamless support for local power down to 9.5V
Programmable DC current limit
Low resistance (typ. 0.1Ω) Hot Swap MOSFET
5x5 mm, 20 lead QFN Package

KTB1095 – 100V Synchronous Flyback Controller with Digital Isolation

Wide 5V to 100V Operating Voltage Range
Integrated Digital Isolator Feedback
- 3000V-rms Integrated Isolation
±1% Voltage Reference
Integrated primary and secondary side MOSFET Drivers
- 3A Sink / 2A Source driving capability
Adjustable Switching Frequency from 100kHz to 700kHz
Integrated Protection: Cycle-by-cycle current limit, Input UVLO, OCP, SCP, TSP
SOIC-16 Wide Body (10.3mm x 7.5mm) Package

About Kinetic Technologies

Kinetic Technologies is a global designer, developer, and provider of proprietary and innovative high-performance analog and mixed-signal semiconductor products for a wide variety of markets. Kinetic’s products help its customers efficiently regulate power, intelligently protect their devices from harmful voltage and current spikes, and deliver high-bandwidth, low-latency, and secured connectivity for video, display, and general-purpose applications.

For more information, please visit http://www.kinet-ic.com/.

*Kinetic Technologies’ logo is a trademark of Kinetic Technologies. All other brand and product names appearing in this document are the property of their respective holders.

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

View source version on businesswire.com: https://www.businesswire.com/news/home/20221114005531/en/

Contact information

Robert Bendz
Phone: +1 -408-746-9000
Email: rbendz@kinet-ic.com

About Business Wire

Business Wire

http://www.businesswire.com

For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Invivoscribe ® Expands IVDR Portfolio with IdentiClone ® Dx IGH Assay Certification26.3.2026 07:13:00 EET | Press release

Invivoscribe, a global leader in precision diagnostics and measurable residual disease (MRD) testing, is proud to announce that its IdentiClone Dx IGH Assay has received In Vitro Diagnostic Regulation (IVDR) 2017/746 Class C certification in the European Union (EU). Commercial availability of the IVDR-certified assay is anticipated by early April 2026. The IVDR replaces the former In Vitro Diagnostics Directive (IVDD), introducing significantly more stringent requirements for clinical evidence, performance evaluation, traceability, and post-market surveillance. Under IVDR, in vitro diagnostic devices are classified according to risk from Class A (lowest risk) to Class D (highest risk). Class C devices, such as IdentiClone Dx IGH, are considered high-risk tests that play a critical role in disease diagnosis and patient management. BSI (Netherlands), an EU-designated Notified Body, granted CE certification for the IdentiClone Dx IGH Assay following an independent conformity assessment un

Dominican Republic Drives Modernization of Electronic Passports Under the Leadership of the Thales - MIDAS Consortium26.3.2026 00:22:00 EET | Press release

The Presidency of the Dominican Republic, through the General Directorate of Passports, issued the country’s first electronic passport as part of its strategy to modernize and strengthen national security. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260324368065/en/ Passport of the Dominican Republic The new document was developed in partnership with Thales, world leader in advanced technologies for the Defense, Aerospace, Cybersecurity, and Digital sectors, and Midas Dominicana, a Dominican business group specializing in the comprehensive management of technology projects in the region. Together, both companies will guarantee the delivery of a passport that is more secure, reliable, and compliant with international standards. The project introduces and personalizes the country’s electronic passports, using advanced technologies to ensure the authenticity and protection of each document, while strengthening the national i

Dominican Republic Drives Modernization of Electronic Passports Under the Leadership of the Thales - MIDAS Consortium26.3.2026 00:22:00 EET | Press release

3D Systems Achieves Full-Scope EU MDR Certification, Accelerating European Launch of NextDent® Jetted Denture Solution Targeted for Summer 202625.3.2026 18:20:00 EET | Press release

3D Systems (NYSE: DDD) today announced it has received full-scope certification under the European Union Medical Device Regulation (EU MDR) 2017/745. The certification was attained on Monday, March 16, 2026. This milestone confirms that the Company’s quality system, technical documentation, and clinical evidence meet the most rigorous regulatory requirements in the medical device sector. With the MDR certificate in hand, 3D Systems will now introduce MDR-compliant product versions through a carefully coordinated, phased rollout across its dental product families and European markets. This approach ensures a smooth transition while maintaining uninterrupted product availability for customers and healthcare providers. The EU MDR certification immediately enables the introduction of innovative new materials and is a pivotal step for one of 3D Systems’ largest potential new product launches: the NextDent® Jetted Denture Solution. This solution forms the cornerstone of the Company’s ‘replac

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom