Quectel Launches High Performance Single-Band GNSS Positioning Module LC76G With Ultra-low Power Consumption
20.6.2022 15:30:00 EEST | Business Wire | Press release
Quectel Wireless Solutions, a global IoT solutions provider, today announced the release of its LC76G module, a single-band compact GNSS module featuring fast and accurate location performance as well as ultra-low power consumption. The LC76G has already entered mass production with sufficient supply to meet the needs of the global positioning market.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20220620005121/en/
Quectel LC76G module, a single-band compact GNSS module featuring fast and accurate location performance as well as ultra-low power consumption
Based on the Airoha AG3352 platform, the LC76G can concurrently receive and process signals from all constellations (GPS, GLONASS, BeiDou, Galileo and QZSS), which in combination with the support of SBAS greatly increases the number of visible satellites and enhances positioning accuracy. The LC76G module can receive signals from up to 47 satellites and achieve 1.5m (CEP50 open-sky) positioning accuracy representing a 40% improvement over previous generations of devices.
Available in a cost-optimized version as well as a low-power version, the LC76G low-power version consumes less than 9mA @3V with all 4 constellations enabled allowing for a 72% reduction in power required than previously possible.
This makes the LC76G extremely attractive for battery operated devices such as wearable personal trackers, wildlife and livestock tracking, Toll tags, portable container trackers as well as a host of traditional markets such as Shared Mobility and low-cost asset trackers.
Featuring an internal SAW filter and integrated LNA, the LC76G can be connected directly to a passive patch antenna and provides filtering against unwanted interference ensuring excellent performance even while driving through dense urban canyons.
Integrated AGNSS technology EPO™, is supported on the LC76G module and reduces the time to first fix (TTFF) with a hot start taking less than 1 second, a warm start within 2 seconds, while the cold start can obtain accurate tracking fixes within 15 seconds. The faster GNSS fixes make it possible to use accurate positioning and navigation services anytime and anywhere with a smaller power budget than previously possible.
While EPO requires manual download of predicted orbits, the LC76G also supports EASY™ (Embedded Assist System) where predicted orbit information is collected directly from the Satellites and provides for up to 3 days of accelerated fixes.
Both EPO and Easy™ are available for each constellation allowing for faster TTFF and reduced dependency on any particular constellation.
Featuring an LCC form factor and an ultra-compact size of 10.1mm × 9.7mm ×2.4mm, the footprint of the LC76G is compatible with other industry solutions as well as Quectel’s legacy L76 and L76-LB modules, allowing for a smooth migration of existing designs to the latest low power GNSS technology.
In addition, Quectel offers a wide range of off-the-shelf and customized high-performance antennas which boost wireless connectivity significantly. Quectel’s LC76G can be combined with a selection of GNSS L1 antennas to enable various positioning requirements. Customized connector type and cable length as well as comprehensive antenna design and test support are also available to facilitate customer product development.
The LC76G will be on display at Embedded World Nuremberg on Booth No 171, Hall 5, June 21- 23 2022.
About Quectel:
Quectel’s passion for a smarter world drives us to accelerate IoT innovation. A highly customer-centric organization, we are a global IoT solutions provider backed by outstanding support and services. Our growing global team of over 4,000 professionals sets the pace for innovation in cellular, GNSS and WiFi/BT modules, antennas and IoT connectivity. Listed on the Shanghai Stock Exchange (603236.SS), our international leadership is devoted to advancing IoT across the globe.
For more information: www.Quectel.com, LinkedIn, Facebook, and Twitter.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20220620005121/en/
Contact information
Ashley Liu
media@quectel.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
REPLY: The Board of Directors Approved the Draft Financial Statements for the Year 202512.3.2026 16:38:00 EET | Press release
Today the Board of Directors of Reply S.p.A. [MTA, STAR: REY] approved the draft financial statement for the year 2025, which will be submitted for approval to the Shareholders’ Meeting to be held in first call in Turin on 23 April 2026. The Reply Group closed 2025 with a consolidated turnover of €2,483.6 million, an increase of 8.0% compared to €2,300.5 million in 2024. All indicators are positive for the period. Consolidated EBITDA was €467.6 million, an increase of 13.9% compared to €410.6 million at December 2024. EBIT, from January to December, was at €391.7 million, which is an increase of 18.5% compared to €330.4 million at December 2024. The Group net profit was at €250.9 million. In 2024, the corresponding value was €211.1 million. Following the results achieved in 2025, the Reply Board of Directors decided to propose to the next Shareholders’ Meeting a dividend distribution of €1.35 per share, which will be payable on 20 May 2026, with dividend date set on 18 May 2026 (record
LZE GmbH Introduces Fraunhofer’s RFicient® Technology to the Market12.3.2026 15:51:00 EET | Press release
LZE GmbH is expanding its technology transfer portfolio and making the RFicient® ultra-low-power wake-up receiver technology from the Fraunhofer Institute for Integrated Circuits IIS available for the first time as a standard chip for close-to-production industrial applications. The solution enables energy-efficient IoT designs that remain continuously reachable while consuming only microamps – a key step for long-lasting, low-maintenance IoT products. LZE GmbH drives technology transfer to market: standard chip availability for close-to-production applications As a bridge between research and industry, LZE GmbH is making it easier for companies to access innovative technologies and helping them to quickly and reliably transform new developments into market-ready solutions. With RFicient®-IC (FH101RF), LZE is providing another high-tech product that comes directly from Fraunhofer research and can now be ordered in volume and integrated into close-to-production product development for t
Owkin Creates New Spin out Waiv, Formerly Owkin Dx, With $33M Financing12.3.2026 15:30:00 EET | Press release
Owkin, the AI company on a mission to solve the complexity of biology, today announced the spin out of Waiv, formerly known as Owkin Dx. The move follows significant investor interest and positions Waiv to bring AI-powered precision testing for better identification of patients in the clinic and in clinical trials, to transform patient care. This follows on from the successful launch of Bioptimus, an Owkin incubated company, in February 2024. Waiv translates AI innovation into real-world clinical impact, developing tests that predict biomarkers and patient outcomes, including RlapsRisk BC for prognostic risk profiling. With multiple tests already in use in clinical settings, its deployment platform Destra, and collaborations with leading pharmaceutical companies, including MSD since 2023 for MSIntuit, Waiv is establishing itself as a leader in translational medical AI. Waiv leverages a decade of Owkin's foundational medical AI research, including access to an extensive patient data net
RQM+ Launches SMART Solutions Life Cycle Partnership Model12.3.2026 15:30:00 EET | Press release
RQM+, a leading MedTech CRO offering regulatory consulting, clinical trial, laboratory, and reimbursement services, today announced the launch of SMART Solutions, a life cycle partnership model designed to help medical device and diagnostics companies manage growing regulatory and development complexity. SMART Solutions introduces a strategy-led operating framework that unifies regulatory, quality, clinical, reimbursement, and laboratory expertise to support MedTech companies across the entire product life cycle to help reduce risk from early development through post-market. “MedTech companies are navigating unprecedented complexity as regulatory expectations evolve, product innovation accelerates, and post-market expectations are expanding,” said John Potthoff, Ph.D., chief executive officer of RQM+. “SMART Solutions moves beyond traditional consulting by providing an integrated life cycle partnership that helps sponsors gain earlier clarity, reduce risk, and execute complex programs
Andersen Consulting Broadens Capabilities Through Collaboration with Acumen Learning12.3.2026 15:30:00 EET | Press release
Andersen Consulting adds depth to its platform through a Collaboration Agreement with Acumen Learning, a U.S.-based firm specializing in business and financial acumen training for leadership development and sales performance. Founded in 2002, Acumen Learning works with Fortune 500 companies to enhance financial literacy, strategic thinking, and decision-making across all levels. Drawing from the principles in their best-selling books “Seeing the Big Picture” and “Business Acumen for Sales Success,” their programs equip leaders and teams to align decisions with corporate strategy, drive performance, and strengthen client relationships. Tailored for industries such as healthcare, energy, and technology, Acumen Learning empowers professionals to translate business knowledge into actionable impact. “At Acumen Learning, our mission is to empower individuals by creating business-savvy professionals who excel in their careers,” said CEO of Acumen Learning Kevin Cope. “Our courses pair practic
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom