SIG SolarCAD II: Solar Thermal Delivering 80°C Daily Even in Winter Months
17.6.2021 08:47:00 EEST | Business Wire | Press release
The new SIG SolarCAD II solar thermal power plant, designed and installed by the Geneva-based TVP Solar and inaugurated in February this year, has proven its high performance in winter conditions.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210616005846/en/
Even covered in snow, TVP Solar thermal panels supply SIG target temperatures and thermal energy (Photo: TVP Solar)
More than 157 MWh (1.92 kWh/m²/day) of solar hot water at over 80°C were delivered to the district heat network (CAD) between January and April, i.e. 30% of the annual energy performance target of 516 MWh set between the Services Industriels de Genève (SIG) and TVP Solar.
Michel Monnard, thermal director at SIG and project instigator, is delighted: “the solar plant’s performance significantly exceeded our expectations, being remarkably efficient during the cold and poor sunshine winter period when the CAD has the most need for heat.”
The TVP solar thermal plant reached the target temperature of 80°C for 96 days of the 102 days recorded, supplying solar hot water to the CAD network (see the graph below); the other days saw intense rain or snowfall. This wintertime performance is unheard of for a flat panel solar thermal installation!
The high-vacuum flat panels capture enough diffused light to melt snow deposited on the surface and quickly reach required operating temperatures. No maintenance or cleaning was carried out on the panels during the 4 months; rain naturally cleaned the surface sufficiently to continue reaching the solar thermal production objectives.
The SIG SolarCAD II results demonstrate the pertinence of TVP Solar's vacuum panel technology for any and all existing district heating networks operating at temperatures above 70°C and wintertime heat demands.
With the winter period now over, the TVP solar thermal plant is expected to deliver over the coming months. The longer hours of sunlight and overall better weather conditions can only further boost this already impressive performance.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20210616005846/en/
Contact information
Media contacts
TVP Solar SA
Florent Saunier, Sales Engineer
saunier@tvpsolar.com
Tel: +41-78-217-94-48
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Rehlko Defines What It Takes to Build AI-Ready Power Infrastructure as Data Center Energy Demands Evolve4.8.2026 16:15:00 EEST | Press release
Rehlko, a global industrial energy resilience platform providing custom-engineered, integrated power solutions for mission-critical infrastructure worldwide, today released new insights on the power infrastructure requirements emerging from the rapid growth of large language models and artificial intelligence. In its latest eBook, AI Readiness Starts with Power: Designing for Real-World Load Conditions, Rehlko examines how increasingly dynamic AI workloads are reshaping expectations for data center power systems and highlights key infrastructure considerations for operators seeking to scale AI capacity reliably and efficiently. As the eBook outlines, AI readiness is increasingly defined not by installed capacity, but by how systems perform under highly variable real-world load conditions. The AI Power Challenge As investment in AI infrastructure accelerates, data center operators face growing pressure to deploy capacity faster than traditional utility infrastructure can support. At the
HappyRobot Raises $150 Million Series C to Build Enterprise Superintelligence4.8.2026 15:30:00 EEST | Press release
HappyRobot, the company putting AI agents to work across complex enterprise operations, today announced it has raised $150 million in Series C funding led by Prysm Capital and co-led by Eurazeo. Existing investors a16z, Base10, Y Combinator are doubling down with participation from strategics like Koch Disruptive Technologies (KDT), Orange, and T.Capital (Deutsche Telekom), Bankinter, Endeavor Catalyst, Kfund and Wave-X. The round values the company at $1.2 billion post-money, bringing total funding to around $200 million and marking a new stage of growth as enterprises deploy AI agents across mission-critical work. HappyRobot works with more than 150+ enterprise customers, including DHL, Kuehne + Nagel, Naturgy, Repsol, and Uber, and has grown 5x since raising its Series B late last year. After first proving its platform in logistics, one of the world’s most operationally demanding industries, HappyRobot is expanding across the supply chain as well as into insurance, energy and utilit
New 3D Flash Memory Technology from Kioxia and Sandisk Achieves Industry’s Highest Bit Density for QLC NAND4.8.2026 15:30:00 EEST | Press release
Future of Memory and Storage Conference (FMS) – Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation (TOKYO: 285A) and Sandisk Corporation (Nasdaq: SNDK) today unveiled their next-generation Quad-Level-Cell (QLC) 3D flash memory technology, which delivers up to 60% increase in bit density compared to their 8th-generation, surpassing 37 Gb/mm² and setting the industry benchmark1 for bit density, performance and power efficiency. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260804147821/en/ Leveraging the companies’ revolutionary CMOS directly Bonded to Array (CBA) technology2 which fabricates CMOS logic and the memory array on separate wafers before bonding them together with high-precision wafer-to-wafer alignment, the new generation improves read and write bandwidth compared to the 8th-generation 3D flash memory and becomes the industry’s first QLC 3D flash memory technology to reach a 4.8 Gb/s 3 interface. Add
Thredd and Pliant Expand Partnership to Launch U.S. Commercial Credit Program, Accelerate Embedded Finance for Businesses4.8.2026 15:00:00 EEST | Press release
Thredd, the AI-first issuer processing platform, today announced the expansion of its partnership with Pliant, bringing the company’s commercial credit and embedded finance platform capabilities to the U.S. market for the first time. Pliant provides European businesses with physical and virtual credit cards that have built-in reconciliation, spend controls, and deep integrations into modern finance stacks. Through its expanded partnership with Thredd, Pliant has successfully mirrored its established European proposition in the U.S., enabling American businesses to issue commercial credit cards that maintain real-time visibility into spend and cash-flow management. The program is live in the U.S. on the Visa network, with bank sponsorship provided by Coastal. The launch follows a successful soft rollout in late 2025, allowing Pliant to begin onboarding U.S. customers while laying the foundation for long-term growth in the market. “This partnership reflects exactly what Thredd is built f
Vasion® is Imprivata®-Ready Certified to Bring Trusted Identity Across Healthcare Print Infrastructure4.8.2026 15:00:00 EEST | Press release
Vasion, a leader in intelligent print automation, today announced a strategic integration with Imprivata, a leading digital identity and access management company for life- and mission-critical industries, starting with healthcare. The Vasion platform, with PrinterLogic®, PrinterLogic Output, and Vasion Automate, offers shared Imprivata customers a unified identity layer, spanning endpoints and printers, for secure, enterprise-wide visibility into every print job. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260804404337/en/ The integration is designed to maximize existing Imprivata deployments. No rip-and-replace is required. The Vasion platform works with the Imprivata infrastructure organizations already have in place, extending its value to print without adding new hardware. Print environments remain a blind spot in identity and access management. The stakes are significant. Quocirca's 2025 Print Security Landscape stu
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom