Business Wire

Studies Presented at TCT Connect Associate Higher Survival With Early Identification of Right Heart Failure and Early Use of Impella RP

16.10.2020 15:05:00 EEST | Business Wire | Press release

Share

Data presented at TCT Connect, the 32nd annual scientific symposium of the Cardiovascular Research Foundation, finds early identification of right heart failure and early use of Impella RP is associated with significantly higher survival rates. Early identification of patients requiring right-heart support is critical because prior studies have shown 37% of AMI cardiogenic shock (AMICS) patients exhibit right heart dysfunction1, which results in an eight times increased risk of mortality2.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20201016005123/en/

To view this piece of content from mms.businesswire.com, please give your consent at the top of this page.

Figure 1 (Graphic: Business Wire)

The prospective, multi-center FDA PMA post-approval study presented at TCT compared survival in patients who would have met enrollment criteria for the RECOVER RIGHT trial to those who would not have qualified for the trial because they were in cardiogenic shock for more than 48 hours. The RECOVER RIGHT trial and subsequent HDE post-approval study data were collected between 2012 and 2017 and led to a PMA approval for the Impella RP in 2017. The ongoing PMA post-approval study presented at TCT Connect enrolled patients from September 2017 through June 2019 and found patients who received Impella RP support within 48 hours of cardiogenic shock onset had a significantly higher survival rate than those who received delayed right-heart support (73% vs. 14%, p<0.001). The 73% survival rate is comparable to the pre-PMA RECOVER RIGHT and HDE studies survival rate. (see figure 1)

“Early detection of right heart failure and early action is key to improving patient survival rates,” said Mark Anderson, MD, chair of the Department of Cardiac Surgery at HUMC/Hackensack Meridian Health. “This study suggests that in right heart failure, reducing the time between shock onset and initiation of Impella RP is a key element of proper patient support.”

A second study presented at TCT aims to help clinicians identify early triggers of right heart failure. The analysis of 100 patients performed by lead investigators of the National Cardiogenic Shock Initiative (NCSI) Study compared AMICS patients with right ventricular failure (RVF) to those without and found persistent diastolic suction alarms on the Automated Impella Controller (AIC) and an elevated central venous pressure (CVP) of greater than 12mmHg can be an early indication of RVF. (see figure 2)

“The real-time insight from the AIC can be an important tool to help a physician achieve better patient outcomes,” said Babar Basir, DO, interventional cardiologist at Henry Ford Hospital. “Prolonged diastolic suction alarms can be an early marker of right ventricular failure in patients with elevated filling pressures, and increased duration of diastolic suction is associated with worse outcomes.”

Impella RP is the most studied right-sided device and the only percutaneous technology with FDA approval designating it as safe and effective for right-heart support. Its exclusive FDA approval is a result of five years of research that included:

  • RECOVER RIGHT, an FDA-approved, prospective, multicenter, single-arm study, which commenced after the company received FDA investigational device exemption (IDE) approval in November 2012 and concluded in 2014
  • A Continuous Access Protocol (CAP)
  • HDE post-approval study, which was completed in 2017
  • PMA post-approval study, initiated in September 2017

In addition, on May 29, 2020, the FDA issued an Emergency Use Authorization (EUA) to expand the use of Impella RP to include patients suffering from COVID-19-related right ventricular complications, including right ventricular dysfunction associated with pulmonary embolism. Impella is the only cardiovascular therapeutic device that has received FDA emergency use authorization to treat COVID-19 patients.

________________
1
Lala et al. J Card Fail. 2018;24:148-156
2 Mehta et al. J Am Coll Cardiol. 2001;37:37-43

ABOUT IMPELLA HEART PUMPS

The Impella 2.5® and Impella CP® devices are U.S. FDA PMA approved to treat certain advanced heart failure patients undergoing elective and urgent percutaneous coronary interventions (PCI) such as stenting or balloon angioplasty, to reopen blocked coronary arteries. The Impella 2.5, Impella CP, Impella CP with SmartAssist®, Impella 5.0®, Impella LD®, and Impella 5.5® with SmartAssist® are U.S. FDA approved heart pumps used to treat heart attack or cardiomyopathy patients in cardiogenic shock, and have the unique ability to enable native heart recovery, allowing patients to return home with their own heart. The Impella RP® is U.S. FDA approved to treat right heart failure or decompensation following left ventricular assist device implantation, myocardial infarction, heart transplant or open-heart surgery. The Impella RP is also authorized for emergency use by healthcare providers (HCPs) in the hospital setting for providing temporary right ventricular support for up to 14 days in critical care patients with a body surface area ≥1.5 m2, for the treatment of acute right heart failure or decompensation caused by complications related to coronavirus disease 2019 (COVID-19), including pulmonary embolism (PE). The Impella RP has not been cleared or approved for the treatment of acute right heart failure or decompensation caused by complications related to COVID-19. Impella Left Ventricular (LV) Support Systems are also authorized for emergency use by HCPs in the hospital setting for providing temporary (≤ 4 days for Impella 2.5, Impella CP, and Impella CP with SmartAssist; and ≤ 14 days for Impella 5.0 and Impella 5.5 with SmartAssist) LV unloading and support to treat critical care patients with confirmed COVID-19 infection who are undergoing ECMO treatment and who develop pulmonary edema while on V-A ECMO support or late cardiac decompensation from myocarditis while on V-V ECMO support. The authorized Impella LV Support Systems have neither been cleared or approved for the authorized indication for use. The Impella RP and Impella LV Support Systems have been authorized for the above emergency use by FDA under an EUA and have been authorized only for the duration of the declaration that circumstances exist justifying the authorization of the emergency use of medical devices under section 564(b)(1) of the Act, 21 U.S.C. § 360bbb-3(b)(1), unless the authorization is terminated or revoked sooner.

In Europe, the Impella 2.5, Impella CP and Impella CP with SmartAssist are CE marked for treatment of high-risk PCI and AMI cardiogenic shock patients for up to 5 days. Impella 5.0 and Impella LD are CE marked to treat heart attack or cardiomyopathy patients in cardiogenic shock for up to 10 days. The Impella 5.5 with SmartAssist is CE marked to treat heart attack or cardiomyopathy patients in cardiogenic shock for up to 30 days. The Impella RP is CE marked to treat right heart failure or decompensation following left ventricular assist device implantation, myocardial infarction, heart transplant, open-heart surgery, or refractory ventricular arrhythmia. To learn more about the Impella platform of heart pumps, including their approved indications and important safety and risk information associated with the use of the devices, please visit www.impella.com.

ABOUT ABIOMED

Based in Danvers, Massachusetts, USA, Abiomed, Inc. is a leading provider of medical devices that provide circulatory support. Our products are designed to enable the heart to rest by improving blood flow and/or performing the pumping of the heart. For additional information, please visit: www.abiomed.com. Abiomed, Impella, Impella 2.5, Impella 5.0, Impella 5.5, Impella LD, Impella CP, Impella RP, SmartAssist and Impella Connect are registered trademarks of Abiomed, Inc., and are registered in the U.S. and certain foreign countries. Impella BTR, Impella ECP, CVAD Study and STEMI DTU Study are pending trademarks of Abiomed, Inc.

FORWARD-LOOKING STATEMENTS

This release contains forward-looking statements, including statements regarding development of Abiomed's existing and new products, the company's progress toward commercial growth, and future opportunities and expected regulatory approvals. The company's actual results may differ materially from those anticipated in these forward-looking statements based upon a number of factors, including uncertainties associated with the scope, scale and duration of the impact of the COVID-19 pandemic, development, testing and related regulatory approvals, including the potential for future losses, complex manufacturing, high quality requirements, dependence on limited sources of supply, competition, technological change, government regulation, litigation matters, future capital needs and uncertainty of additional financing, and other risks and challenges detailed in the company's filings with the Securities and Exchange Commission, including the most recently filed Annual Report on Form 10-K and the filings subsequently filed with or furnished to the SEC. Readers are cautioned not to place undue reliance on any forward-looking statements, which speak only as of the date of this release. The company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements that may be made to reflect events or circumstances that occur after the date of this release or to reflect the occurrence of unanticipated events.

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

Contact information

Tom Langford
Director of Communication
(978) 882-8408
TLangford@abiomed.com

About Business Wire

For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Kioxia and Sandisk Begin Production of 10th-Generation 3D Flash Memory Products at Kitakami Plant Fab23.7.2026 13:19:00 EEST | Press release

Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation (TOKYO: 285A) and Sandisk Corporation (Nasdaq: SNDK) today announced the start of production for their 10th-generation 3D Flash memory technology at Fab2 (K2) at the Kitakami Plant in Iwate Prefecture in Japan. The milestone comes as the companies continue to drive meaningful, multi-year bit growth to address the strong demand for their innovative flash memory technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260702296115/en/ Unveiling ceremony for the K2 facility In conjunction with the start of production, the companies held an unveiling ceremony for the K2 facility. Opening in September 2025, the facility has produced the companies’ 8th-generation 3D flash memory products and will begin to scale production with the introduction of their 10th-generation products. Both generations of 3D flash memory adopt innovative CBA (CMOS directly Bonded to Array)

VeriSilicon Introduces CPP2000 Camera Post-Processing IP for Embodied Robotics and Mobile Vision Applications3.7.2026 13:02:00 EEST | Press release

VeriSilicon (688521.SH) today announced its high-performance CPP2000 Camera Post-Processing (CPP) IP, expanding the company’s Image Signal Processing (ISP) solutions with advanced post-processing capabilities. By improving image quality and visual perception in mobile imaging scenarios, CPP2000 enables more reliable vision performance in robotics, drones, and other mobile vision applications. CPP2000 integrates multiple image processing technologies and can further optimize YUV images output from image signal processors. The IP supports image and video processing at up to 8K resolution and offers multiple hardware configuration options to meet diverse requirements in Power, Performance, Area (PPA), and latency across different applications. CPP2000 leverages the combined operation of multiple image processing technologies, including motion-compensated temporal filtering, advanced spatial noise reduction, chroma adjustment and dynamic contrast improvement, and edge enhancement. Together

Messer Acquires Singapore-Based Industrial Gas Platform; Japan Corporate Advisory Institute Advises Sellers3.7.2026 12:11:00 EEST | Press release

Messer, the world’s largest privately held specialist for industrial, medical, electronic and specialty gases, has acquired WKS Group, a Singapore-based industrial gas platform with operations across Singapore and southern Malaysia. Transaction terms were not disclosed. Messer reported consolidated sales of approximately EUR 4.5 billion for its 2025 financial year. Founded in Singapore in 1977, WKS Group comprises six companies and employs approximately 195 people across Singapore and southern Malaysia. The acquisition expands Messer’s operating footprint in Southeast Asia and strengthens its access to key industrial clusters across the region. “We are pleased to have completed this transaction with Messer, whose strategic vision makes them an excellent partner for WKS Group,” said Mr. Wong Koh Hoi, shareholder of WKS Group. “We appreciate JCAI’s professionalism and dedication throughout the process, and their expertise was instrumental in achieving a successful outcome.” Japan Corpora

Access Advance Welcomes Meta Platforms, Inc. and Alibaba Group to the Video Distribution Patent Pool3.7.2026 02:00:00 EEST | Press release

Access Advance LLC today announced that Meta Platforms, Inc., one of the world's largest distributors of video content across its Facebook, Instagram, Threads, and WhatsApp services, has joined the Video Distribution Patent Pool (VDP Pool) as a Licensee. Meta also joined both the HEVC Advance and VVC Advance pools as a Licensee. Alibaba Group, whose video infrastructure spans a wide range of video-based services across e-commerce, entertainment, and digital media platforms, was also announced as a VDP Pool Licensee this week. Meta and Alibaba joining the VDP Pool further reinforces the program’s market leading position in resolving the licensing issues around the use of modern video codecs, including VP9, AV1, HEVC and VVC, across all the diverse business models of internet video streaming. "A significant U.S.-based company like Meta joining as a Licensee is a milestone moment for the content distribution business and the VDP Pool," said Peter Moller, CEO of Access Advance. "Meta reach

Kioxia Commences Sample Shipments of 10th-Generation BiCS FLASH™ Devices Delivering High Performance, High Capacity and Low Power Consumption3.7.2026 02:00:00 EEST | Press release

Kioxia Corporation, a world leader in memory solutions, today announced that it has commenced sample shipments of 1Tb (terabit) Triple-Level-Cell (TLC) memory devices utilizing its 10th-generation BiCS FLASH™ 3D flash memory technology.1 These will be primarily integrated into the company’s enterprise and data center SSDs, strengthening Kioxia’s lineup to meet the growing demand for AI storage, which requires higher performance, higher capacity, and lower power consumption. These new products will be manufactured using state-of-the-art equipment at Kioxia’s Kitakami Plant Fab2 facility in Iwate Prefecture, Japan. By leveraging innovative CMOS directly Bonded to Array (CBA) technology2 and On-Pitch Select Gate Drain (OPS) technology,3 both adopted since the 8th-generation BiCS FLASH™, the 10th-generation technology achieves a NAND interface speed of 4.8 Gb/s,4 a 33% improvement over the 8th generation. Bit density has increased by 59% by stacking 332 layers and improving lateral density

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye