Velodyne Lidar’s Intelligent Infrastructure Solution Deployed in Helsinki Traffic Safety Improvement Project
22.6.2022 13:48:00 EEST | Business Wire | Press release
Velodyne Lidar, Inc. (Nasdaq: VLDR, VLDRW) today announced its Intelligent Infrastructure Solution (IIS) was deployed in Helsinki, Finland to collect traffic data and improve roadway safety. The project demonstrated the high accuracy and value of IIS in multimodal traffic counting and classification, and in near miss collision detection and monitoring.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20220622005178/en/
Velodyne Lidar announced its Intelligent Infrastructure Solution was deployed in Helsinki, Finland to collect traffic data and improve roadway safety. The project demonstrated the high accuracy and value of the solution in multimodal traffic counting and classification, and in near miss collision detection and monitoring. Test site 1: Tyynenmerenkatu – Välimerenkatu – Jätkäsaarenlaituri (Helsinki, Finland). (Graphic: Nodeon Finland)
The project was directed by the Forum Virium Helsinki and City of Helsinki in collaboration with Nodeon Finland and Commsignia. Intelligent Infrastructure Solution, which combines Velodyne’s award-winning lidar sensors and Bluecity’s AI software, was used to monitor traffic flow at three intersections in the vibrant Jätkäsaari section of Helsinki. In addition, one of the intersections was equipped with a cooperative intelligent transport system (C-ITS) roadside unit to enable experiments that sent warning messages to drivers on vulnerable road users at the intersection.
In the project, IIS delivered an average counting accuracy of 97 percent for vehicle traffic as well as bicycle and pedestrian traffic. The solution also demonstrated its efficacy in detecting near miss collision situations, such as running red lights and jaywalking, which provides valuable information for developing traffic management improvements that enhance safety. Next steps for the project include further developing vehicle classification capabilities, building a solution for mobile use for short-term traffic measurement and creating an interface between IIS and traffic signal controllers.
“Velodyne Lidar has shown it can reliably and accurately generate traffic information about intersection traffic involving vehicles, pedestrians and bicycles, including volume and classification data, directions, trajectories and speed,” said Janne Rinne, project manager in Forum Virium Helsinki. “The solution provides accurate real-time detection data to support C-ITS safety solutions like vulnerable road user warnings that can help improve road safety.”
“Our Intelligent Infrastructure Solution provides the data that transportation planners need to understand traffic network problems and take a proactive approach on safety for vehicles and vulnerable road users,” said Laura Wrisley, Senior Vice President of Worldwide Sales, Velodyne Lidar. “Our solution is leading the way in transforming infrastructure to make communities smarter and safer.”
About Intelligent Infrastructure Solution
Intelligent Infrastructure Solution delivers traffic monitoring and analytics to improve road safety, efficiency and air quality, and help cities plan for smarter, safer transportation systems. The full stack solution is deployed across three continents, including systems rolled out in Texas, Florida, Nevada, California, New Jersey, Missouri and Canada.
Velodyne’s lidar sensors do not identify individuals’ facial characteristics, an important concern for civic applications. Lidar has an advantage in privacy over camera-only systems because lidar does not record details like hair and skin color. Velodyne’s lidar sensors reliably collect data in any lighting or weather condition, supporting 24/7, 365 days a year operation.
By improving traffic flow and reducing congestion, Intelligent Infrastructure Solution advances energy efficiency and reduces greenhouse gas emissions for a more sustainable future. Recently, the solution won the 2022 SXSW Innovation Awards by the South by Southwest Conference and Festivals.
For more information on the Intelligent Infrastructure Solution, contact Velodyne Sales: 669.275.2526, sales@velodyne.com.
About Velodyne Lidar
Velodyne Lidar (Nasdaq: VLDR, VLDRW) ushered in a new era of autonomous technology with the invention of real-time surround view lidar sensors. Velodyne, the global leader in lidar, is known for its broad portfolio of breakthrough lidar technologies. Velodyne’s revolutionary sensor and software solutions provide flexibility, quality and performance to meet the needs of a wide range of industries, including robotics, industrial, intelligent infrastructure, autonomous vehicles and advanced driver assistance systems (ADAS). Through continuous innovation, Velodyne strives to transform lives and communities by advancing safer mobility for all.
Forward Looking Statements
This press release contains "forward looking statements" within the meaning of the "safe harbor" provisions of the United States Private Securities Litigation Reform Act of 1995 including, without limitation, all statements other than historical fact and include, without limitation, statements regarding Velodyne’s target markets, new products, development efforts, and competition. When used in this press release, the words "estimates," "projected," "expects," "anticipates," "forecasts," "plans," "intends," "believes," "seeks," "may," "will," “can,” "should," "future," "propose" and variations of these words or similar expressions (or the negative versions of such words or expressions) are intended to identify forward-looking statements. These forward-looking statements are not guarantees of future performance, conditions or results and involve a number of known and unknown risks, uncertainties, assumptions and other important factors, many of which are outside Velodyne's control, that could cause actual results or outcomes to differ materially from those discussed in the forward-looking statements. Important factors, among others, that may affect actual results or outcomes include uncertainties regarding government regulation and adoption of lidar, the uncertain impact of the COVID-19 pandemic on Velodyne's and its customers' businesses; Velodyne's ability to manage growth; Velodyne's ability to execute its business plan; uncertainties related to the ability of Velodyne's customers to commercialize their products and the ultimate market acceptance of these products; the rate and degree of market acceptance of Velodyne's products; the success of other competing lidar and sensor-related products and services that exist or may become available; uncertainties related to Velodyne's current litigation and potential litigation involving Velodyne or the validity or enforceability of Velodyne's intellectual property; and general economic and market conditions impacting demand for Velodyne's products and services. For more information about risks and uncertainties associated with Velodyne’s business, please refer to the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors” sections of Velodyne’s SEC filings, including, but not limited to, its annual report on Form 10-K and quarterly reports on Form 10-Q. All forward-looking statements in this press release are based on information available to Velodyne as of the date hereof, Velodyne undertakes no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20220622005178/en/
Contact information
Velodyne Investor Relations
InvestorRelations@velodyne.com
Media
Codeword
Liv Allen
velodyne@codewordagency.com
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Westlake Epoxy Expands Distribution Relationship with Brenntag to India18.2.2026 03:30:00 EET | Press release
Westlake Corporation (NYSE: WLK) today announced that Westlake Epoxy will expand its long‑standing distribution relationship with Brenntag to South and West India. The agreement builds on a successful collaboration across Europe, North and South America, and Southeast Asia, extending Westlake Epoxy’s reach into one of the world’s fastest‑growing coatings, adhesives and construction markets. Under the expanded collaboration, Brenntag will distribute Westlake Epoxy’s established portfolio of epoxy solutions for coatings, adhesives and construction applications, including the EPON™, EPIKOTE™, EPIKURE™ and EPI‑REZ™ product lines. Customers are expected to benefit from reliable local supply, technical service and application‑focused formulation support tailored to regional requirements. India’s coatings, adhesives and construction sectors continue to grow, driven by infrastructure investment, urbanization and increasing performance expectations. By combining Westlake Epoxy’s proven epoxy te
Compass Pathways Launches Proposed $150.0 Million Public Offering17.2.2026 23:06:00 EET | Press release
Compass Pathways plc (Nasdaq: CMPS), a biotechnology company dedicated to accelerating patient access to evidence-based innovation, announced today the launch of a proposed public offering of $150.0 million of American Depositary Shares (“ADSs”), each representing one ordinary share, and in lieu of ADSs, to certain institutional investors, pre-funded warrants to purchase ADSs. All securities are being offered by Compass Pathways. Compass Pathways expects to grant the underwriters a 30-day option to purchase up to an additional $22.5 million of ADSs at the public offering price, less the underwriting discounts and commissions . The proposed offering is subject to market and other conditions, and there can be no assurance as to whether or when the proposed offering may be completed, or as to the actual size or terms of the proposed offering. Jefferies, TD Cowen, Cantor and Stifel are acting as joint book-runners for the proposed offering. H.C. Wainwright & Co. is also acting as lead mana
Lattice Launches Joint Cyber Resilience Reference Kit with EXOR International and TrustiPhi to Simplify Secure Device Development17.2.2026 23:00:00 EET | Press release
Lattice Semiconductor (NASDAQ: LSCC), the low power programmable leader, today announced a Cyber Resilience Reference Kit designed to help industrial and edge device manufacturers accelerate secure system design, developed in collaboration with EXOR International and TrustiPhi. Built on the Lattice MachXO3D™ secure control FPGA, EXOR International’s industrial edge platform, and TrustiPhi’s integrated security orchestration platform, the kit enables hardware‑rooted trust, secure lifecycle management, and industrial‑grade connectivity to accelerate cyber resilient system design. “Security can no longer be an afterthought, especially at the industrial edge. With this collaboration, we’re giving customers a practical, integrated way to accelerate secure system development and support emerging requirements such as the EU Cyber Resilience Act,” said Karl Wachswender, Senior Principal System Architect Industrial, Lattice Semiconductor. “Through our early access program, major industrial comp
Capvidia and Hexagon to Host Live Webinar on Building a “Real” Digital Thread from Design to Inspection Using MBD, QIF, and PC-DMIS17.2.2026 20:50:00 EET | Press release
Capvidia, a global leader in Model-Based Definition (MBD) and model-based interoperability, announced it will co-host a live webinar with Hexagon focused on creating a seamless digital thread that connects design, production, and inspection using MBD, the Quality Information Framework (QIF), and Hexagon’s PC-DMIS metrology software. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260217927277/en/ Connecting design to inspection—without the rework. Capvidia + Hexagon show how MBD + QIF power a real digital thread into PC-DMIS for faster, traceable, more accurate inspection. Titled “Connected for Success: Unlock seamless data flow and precision from design to inspection”, the webinar will take place on Wednesday, February 25, 2026, at 9:00 AM EST / 2:00 PM GMT. Attendees will see a practical demonstration of how an integrated approach can reduce manual data entry, minimize translation errors, preserve design intent, and improve
ProAmpac Pushes the Limits of Fiber Packaging with New High Barrier Packaging Innovation Platform17.2.2026 19:08:00 EET | Press release
ProAmpac, a global leader in flexible packaging and material science, announces the expansion of its ProActive Recyclable® RP-2000 High Barrier Series. This curbside recyclable, fiber-based packaging platform is designed to help brands transition away from traditional non-recyclable high-barrier multilayer structures, such as paper/foil, paper/metalized polyethylene terephthalate (METPET), and certain film laminations. The RP-2000 platform provides strong barriers to oxygen and moisture, making it well-suited for sensitive dry food products such as oatmeal, granola, cereal, spices, snacks, dried fruits, and nuts. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260217779741/en/ ProAmpac's RP-2000MHB Series “Supporting the growing Fiberization of Packaging® movement, and as adoption of fiber-based structures accelerates, it is critical that ProAmpac continues to expand the functional performance envelope of paper-based material
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
