Wellling’s and Motinova’s New E-bike Motor Series Debut at EUROBIKE 2022
14.7.2022 05:14:00 EEST | Business Wire | Press release
Motinova’s and Welling’s latest E-bike motor series debut at EUROBIKE 2022.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20220713005981/en/
New Motinova and Welling E-bike motor series offerings at Booth H8-I20, EUROBIKE 2022 (Indoors) (Photo: Business Wire)
By 2030, the global E-Bike market will reach 19 million units. As the green and low-carbon lifestyle trends, E-bikes have gradually become an alternative choice for urban commuters and field riders. Welling and Motinova offer three central motors for large chain wheels: Welling W6000, Welling 8500, and Motinova MT6000, featuring higher power density, higher efficiency, shorter response time, and lower wastage rate.
Welling W6000 for urban E-bikes: This high-performing central motor for large chain wheels is compact and low-noise designed (under 52dB), enabling a quiet riding experience. Its innovative torque sensor can adapt to a highly flexible riding curve for different biking scenarios. Its algorithm allows high-precision delay and inertia compensation for a smoother and more stable riding experience.
Welling W8500 for mountain E-bikes: Its unique flat wire winding structure with optimized design can enable efficiency to reach 80%, and increase battery range in mountain biking. Its ultra-high overload capacity can run continuously at 75% peak torque while keeping the shell temperature below 60°C for longer service life and more powerful output. Its highly integrated design enables it to have a weight of less than 3 kg in a very compact size.
Motinova MT6000: This high-performing central motor for large chain wheels is designed for urban commuters. The motor is only 3 kg and is very delicate. It could provide a maximum assistance rate of 270% in a strong and quiet momentum. Its pedaling rate can reach as high as 100rpm with five riding modes. Bikers can enjoy the fun of riding in all kinds of road conditions.
Motinova motors for small chain wheels, such as the VOLANS and PEGASI series; cycle computers; accessories; and other biking offerings are also on exhibition. In the outdoor exhibition area, Motinova and Welling also provide a fun test riding experience, “Ride Longer, Live Better.”
Motinova and Welling will further enhance their core capabilities in the field of intelligent transportation and the two-wheel transportation market.
Motinova’s and Welling’s parent, Midea Industrial Technology, has built 27 R&D centers in China, Austria, India, and Japan, with an accumulation of more than 5,500 authorized patents.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20220713005981/en/
Contact information
Zhang Haichun
zhanghc69@midea.com
+86-18600038145
About Business Wire
For more than 50 years, Business Wire has been the global leader in press release distribution and regulatory disclosure.
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Kioxia and Sandisk Begin Production of 10th-Generation 3D Flash Memory Products at Kitakami Plant Fab23.7.2026 13:19:00 EEST | Press release
Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation (TOKYO: 285A) and Sandisk Corporation (Nasdaq: SNDK) today announced the start of production for their 10th-generation 3D Flash memory technology at Fab2 (K2) at the Kitakami Plant in Iwate Prefecture in Japan. The milestone comes as the companies continue to drive meaningful, multi-year bit growth to address the strong demand for their innovative flash memory technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260702296115/en/ Unveiling ceremony for the K2 facility In conjunction with the start of production, the companies held an unveiling ceremony for the K2 facility. Opening in September 2025, the facility has produced the companies’ 8th-generation 3D flash memory products and will begin to scale production with the introduction of their 10th-generation products. Both generations of 3D flash memory adopt innovative CBA (CMOS directly Bonded to Array)
VeriSilicon Introduces CPP2000 Camera Post-Processing IP for Embodied Robotics and Mobile Vision Applications3.7.2026 13:02:00 EEST | Press release
VeriSilicon (688521.SH) today announced its high-performance CPP2000 Camera Post-Processing (CPP) IP, expanding the company’s Image Signal Processing (ISP) solutions with advanced post-processing capabilities. By improving image quality and visual perception in mobile imaging scenarios, CPP2000 enables more reliable vision performance in robotics, drones, and other mobile vision applications. CPP2000 integrates multiple image processing technologies and can further optimize YUV images output from image signal processors. The IP supports image and video processing at up to 8K resolution and offers multiple hardware configuration options to meet diverse requirements in Power, Performance, Area (PPA), and latency across different applications. CPP2000 leverages the combined operation of multiple image processing technologies, including motion-compensated temporal filtering, advanced spatial noise reduction, chroma adjustment and dynamic contrast improvement, and edge enhancement. Together
Messer Acquires Singapore-Based Industrial Gas Platform; Japan Corporate Advisory Institute Advises Sellers3.7.2026 12:11:00 EEST | Press release
Messer, the world’s largest privately held specialist for industrial, medical, electronic and specialty gases, has acquired WKS Group, a Singapore-based industrial gas platform with operations across Singapore and southern Malaysia. Transaction terms were not disclosed. Messer reported consolidated sales of approximately EUR 4.5 billion for its 2025 financial year. Founded in Singapore in 1977, WKS Group comprises six companies and employs approximately 195 people across Singapore and southern Malaysia. The acquisition expands Messer’s operating footprint in Southeast Asia and strengthens its access to key industrial clusters across the region. “We are pleased to have completed this transaction with Messer, whose strategic vision makes them an excellent partner for WKS Group,” said Mr. Wong Koh Hoi, shareholder of WKS Group. “We appreciate JCAI’s professionalism and dedication throughout the process, and their expertise was instrumental in achieving a successful outcome.” Japan Corpora
Access Advance Welcomes Meta Platforms, Inc. and Alibaba Group to the Video Distribution Patent Pool3.7.2026 02:00:00 EEST | Press release
Access Advance LLC today announced that Meta Platforms, Inc., one of the world's largest distributors of video content across its Facebook, Instagram, Threads, and WhatsApp services, has joined the Video Distribution Patent Pool (VDP Pool) as a Licensee. Meta also joined both the HEVC Advance and VVC Advance pools as a Licensee. Alibaba Group, whose video infrastructure spans a wide range of video-based services across e-commerce, entertainment, and digital media platforms, was also announced as a VDP Pool Licensee this week. Meta and Alibaba joining the VDP Pool further reinforces the program’s market leading position in resolving the licensing issues around the use of modern video codecs, including VP9, AV1, HEVC and VVC, across all the diverse business models of internet video streaming. "A significant U.S.-based company like Meta joining as a Licensee is a milestone moment for the content distribution business and the VDP Pool," said Peter Moller, CEO of Access Advance. "Meta reach
Kioxia Commences Sample Shipments of 10th-Generation BiCS FLASH™ Devices Delivering High Performance, High Capacity and Low Power Consumption3.7.2026 02:00:00 EEST | Press release
Kioxia Corporation, a world leader in memory solutions, today announced that it has commenced sample shipments of 1Tb (terabit) Triple-Level-Cell (TLC) memory devices utilizing its 10th-generation BiCS FLASH™ 3D flash memory technology.1 These will be primarily integrated into the company’s enterprise and data center SSDs, strengthening Kioxia’s lineup to meet the growing demand for AI storage, which requires higher performance, higher capacity, and lower power consumption. These new products will be manufactured using state-of-the-art equipment at Kioxia’s Kitakami Plant Fab2 facility in Iwate Prefecture, Japan. By leveraging innovative CMOS directly Bonded to Array (CBA) technology2 and On-Pitch Select Gate Drain (OPS) technology,3 both adopted since the 8th-generation BiCS FLASH™, the 10th-generation technology achieves a NAND interface speed of 4.8 Gb/s,4 a 33% improvement over the 8th generation. Bit density has increased by 59% by stacking 332 layers and improving lateral density
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom